Tarantola NG Montageanleitung / mounting instructions
8.2
S.Port
Der S.Port wird benötigt für Firmware-Updates der
Empfänger.
Servo-Verlängerungskabel am S.Port.Anschluss
anlöten und mit Heisskleber fixieren, Stecker unten
am Fuß herausführen.
2020-07-19
The S.Port is needed to perform firmware updates
on the receivers.
Solder servo extension wire to the S.Port connector
and fix with hot glue. Guide wire through grip for
access through the bottom.
28