Technical Data - NORSE PROFESSIONAL SK125 Bedienungsanleitung

SK125
Troubleshooting
Symptom
No detergent
1. Detergent tank is clogged
suction
1. Unit is pressurised
Pressure washer
2. Plug is not connected correctly or
does not start up
3. Thermal safety switch has tripped
1. Water inlet is clogged
2. Pump sucking air from hose
Pump does not
reach necessary
3. Variable spray nozzle is worn or not
pressure
4. Unloader / valves are clogged/ worn
1. Pump is sucking air
2. Clogged nozzle
Fluctuating
pressure
3. Valves dirty, worn or clogged
4. Water seals worn
Motor stops
1. Thermal safety switch has tripped
suddenly

Technical Data

Item
Working pressure
Allowable pressure
Maximum flow rate
Motor capacity
Power supply voltage
Intake water pressure
Max input temperature
Motor insulation rating
Dimensions
Weight
14
Possible Cause(s)
electrical supply is damaged / faulty
connections
correct size
due to overheating
© NØRSE
English
Corrective Actions
1. Clean detergent tank with warm water
1. Clean water inlet
2. Check that connections are properly
tightened
3. Switch off unit and allow to cool down
1. Clean quick connector filter
2. Check that connections are properly
tightened
3. Call the dealer
4. Call the dealer
1. Check that hoses and connections are
tight
2. Clean with tip cleaner
3. Call the dealer
4. Call the dealer
1. Check mains supply voltage
corresponds to specifications
SK125
11.8 MPa / 118 BAR / 1750 PSI
16 MPa / 160 BAR / 2350 PSI
460 Litres / hour
2200 Watt
240V ~ 50HZ
Min 0.1MPa / Max 1MPa
50 °
Class F
355 x 255 x 950mm
11.5Kg