Seite 2
Befestigen Sie die Adapter 3048-5E an der Position wo Sie die Schutzverglasung montieren möchten. Dazu markieren Sie zuerst die Position der Adapter und verschrauben diese dann mit für den Untergrund geeignetem Befestigungsmaterial. Fasten the 3048-5E adapters in the position where you want to mount the protective glazing. To do this, first mark the position of the adapters and then secure them to the surface with suitable screws and dowels.
Seite 3
Stecken Sie die Profile 3036-1E auf die Adapter. Insert the profiles 3036-1E onto the adapters.
Seite 4
Richten Sie die Profile aus und befestigen Sie die mit den Madenschrauben S914A2D5x8. Align the profiles and secure them with set screws S914A2D5x8.
Seite 5
Befestigen Sie die Winkelverbinder 8178ZN an den Profilen. Attach the angle connectors 8178ZN to the profiles.
Seite 6
Kleben Sie die Klebepunkte 21000624 auf die Profile. Adhere the adhesive pads 21000624 onto the profiles.
Seite 7
Positionieren Sie das Glas. Position the glass.
Seite 8
All images, technical drawings and descriptions are copyrighted urheberrechtlich geschütztes Eigentum der Pauli + Sohn GmbH. property of the Pauli + Sohn GmbH. Technical measurements within Technische Maßangaben innerhalb des Kataloges sind unver- the catalog are not binding and are subject to change. Any liability bindlich.