Operation Manual; Maintenance Notice - Guzzanti GZ 593 Gebrauchsanleitung

Operation manual

1. Power Button:
This button can control the machine on and off.
2. Mode:
The key can enter the mode selection state, can be switched to ordinary dehumidification, continuous
dehumidification, Strong dehumidification, fast drying.
3. Settings:
Humidity can be set between 30% - 80% (5% adjustment factor).
Humidity setting is only valid under normal dehumidification.
4. Timing:
Buttons can be set into the timing of the state, the time is 1-24 hours; there is a time, „Hr" timing is
often bright.
In the boot state, can be timed shutdown operation.
In standby mode, the timing can be scheduled to start operation,can be pre boot mode.
5. Purification:
Lights turn on when entering the purification; wind speed can be set, Timing is effective, set the
humidity is invalid; when entering the purification mode, exit dehumidification mode.
When you exit the purge mode, automatically restore the last dehumidification mode.
6. Child Lock:
Child lock button can continue to hold down for 3 seconds to enter the key lock state, press all the
keys are invalid.
Continue to hold down 3 seconds to exit the child lock status.
7. Wind Speed:
This feature needs to be switched to „clean" and „ordinary dehumidification" under the use of wind
speed can be in the high / low wind switch.
8. Sleep:
Open the sleep mode, in addition to sleep: Lamp / lamp / lamp with water lock the lights out;ln the
sleep mode, press any key to perform the function and wake up display, 5 seconds after the operation
to continue to sleep.

Maintenance notice

Warning
Please don't plug in with wet hands to avoid electric shock.
Notice
Please cut off the power supply before daily cleaning and
maintenance.
Don't dismantle the floater from the water tank.
12
Prohibit wet hand
Pull off plug
Prohibit