Renkforce 1713218 Bedienungsanleitung Seite 2

Operating instructions
24-Port Patch Panel BNC
Item no. 1713218
Intended use
The product is suitable for installation in a 48.26 cm (19") network cabinet. The
product has BNC sockets on both sides of the plate so the cables can be directly
connected on both sides.
For safety purposes, you must not rebuild and/or modify this product. Using the
product for purposes other than those described above may damage the product.
In addition, improper use can cause hazards such as a short circuit, fire or electric
shock. Read the instructions carefully and store them in a safe place. If you pass the
product on to a third party, please hand over these operating instructions as well.
This product complies with statutory, national and European regulations. All company
and product names are trademarks of their respective owners. All rights reserved.
Package contents
• Patch panel
• 4x screw
• Operating instructions
Up-to-date operating instructions
Download the up-to-date operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of symbols
The symbol with an exclamation mark in a triangle is used to highlight
important information in these operating instructions. Always read this
information carefully.
Safety instructions
Read the operating instructions and safety information carefully. If
you do not follow the safety instructions and information on proper
handling in these operating instructions, we assume no liability for
any resulting personal injury or damage to property. Such cases will
invalidate the warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. It may become
a dangerous toy for children.
• Protect the product from extreme temperatures, direct sunlight, strong
jolts, high humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of
operation and protect it from any accidental use. Safe operation can no
longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Please handle the product carefully. Jolts, impacts or a fall even from a
low height may damage the product.
• Always observe safety and operating instructions of any other devices
which are connected to the product.
• Consult a technician if you are not sure how to use or connect the product,
or if you have concerns about safety.
• Maintenance, modifications and repairs must be done by a technician or
a specialist repair centre.
• If you have questions which remain unanswered by these operating
instructions, contact our technical support service or other technical
personnel.
Installation
• Connect the BNC connectors of your equipment with the BNC sockets on the patch
panel.
• Label the cables in a way conducive to improved oversight of the cable connections
in case of malfunction.
• Insert the patch panel in the network cabinet. Attach the patch panel with the screws
provided.
Care and Cleaning
• Never use aggressive detergents, rubbing alcohol or other chemical solutions as
these can damage the housing or impair the product function.
• Use a dry, lint-free cloth to clean the product.
Disposal
The product must not be disposed of with the household waste At the end
of its service life, dispose of the product according to the relevant statutory
regulations.
Technical data
Resistance .....................................50 Ω
Operating/storage conditions .........0 to +70 °C, max. 75 % RH
Dimensions (W x H x D) ................482.6 x 44.45 x 32 mm
Weight ...........................................580 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or capturing in
electronic data processing systems) requires prior written approval from the publisher. Reprinting, also in part, is
prohibited. This publication represent the technical status at the time of printing.
Copyright 2018 by Conrad Electronic SE. *1713218_v2_0918_02_IPL_m_en