GSE 13020 Bedienungsanleitung
Bremspedaldruckmesser
Quicklinks
BRAKE PEDAL FORCE INSTRUMENT
User guide
Cabinet dimensions LxWxH [mm] 160x80x60mm, Weight 0.7 kg.
1. Preparation for test:
•
Remove the cover from the back of the display unit, remove the battery holder
and insert 8 pcs. 1.5V batteries, type IEC R6 / UM3.
•
The pedal pressure sensor is mounted on the brake pedal with the black side
facing up and attached with the rubber strap.
•
Set the switch to position 1 and the display shows "000". If another value is
shown, turn the adjusting screw, until the correct value is obtained.
2. Measuring:
When the pedal pressure sensor is used, the current pedal pressure is shown. If the
switch is moved to the "Measure Hold" position, the display shows and maintains the
highest pressure measured during the test.
3. Maintenance:
When the display shows "LOBAT", the batteries should be replaced.
4. Brake pedal force instrument with analog output. Only for 13025:
Socket: Lemo
No. 2..........
7V – 12V DC
No. 3..........
– signal
No. 5..........
+ signal 1 mV/N
No. 6..........
Ground
The pictures are illustrative and may vary from the originals.
Bremsepedal-trykmåler
RACO A/S
Overgade 4
DK 6670 Holsted
Tlf. +45 69106680
E-mail: info@raco.dk
Web: www.raco.dk
13020/13025
RACO A/S
Overgade 4
DK 6670 Holsted
Tlf. +45 69106680
E-mail: info@raco.dk
Web: www.raco.dk
Inhaltszusammenfassung für GSE 13020
- Seite 1 Socket: Lemo No. 2………. 7V – 12V DC No. 3………. – signal No. 5………. + signal 1 mV/N 13020/13025 No. 6………. Ground The pictures are illustrative and may vary from the originals. RACO A/S RACO A/S Overgade 4 Overgade 4...
- Seite 2 BREMSEPEDAL TRYKMÅLER BREMSPEDALDRUCKMESSER Brugermanual Bedienungsanleitung Gehäuse Abmessungen LxBxH [mm] 160x80x60mm, Gewicht 0,7 kg. Kabinet dimensioner LxBxH [mm] 160x80x60mm, Vægt 0,7 kg. 1. Vorbereitung zum Test: 1. Forberedelse til test: • Entfernen Sie die Abdeckung auf der Rückseite der Anzeigeeinheit, Batteriehalter •...