Chauvin Arnoux C.A 6608 Bedienungsanleitung Seite 14

Do not use if the housing is damaged or not correctly closed.

Do not place your fingers near unused terminals.

If the instrument is used other than as specified in this manual,

the protection provided by the instrument may be impaired.
Do not use this instrument if it seems to be damaged.

Check the integrity of the insulation of the leads and of the

housing. Replace damaged leads.
Be prudent when working in the presence of voltages

exceeding 70Vdc or 33Vrms and 46.7Vpp; such voltages can
cause a risk of electrocution. The use of individual protections is
recommended in some cases.
Always keep your hands behind the physical guards of the

probe tips or alligator clips.
Always disconnect all leads from the measurement and from

the instrument before opening the housing.
14