Inakustik AC-1204 AIR Bedienungsanleitung Seite 4

OPERATION MANUAL OPERATION MANUAL
AC-1204 AIR PREMIUM USB CAR POWER ADAPTER QC 5/9/12V
ITEM-NO.: 0076290XX | 0076291XX
the magnetic field peaks disturb all other devices in their neighborhood like small pinpricks. Particularly during demanding and dynamic passages in music, the power supply and thus the power cord is
subject to high demands.
For these reasons, we have developed the AC-1204 AIR. It is based on the legendary Air technology, which we have already used, for example, for the speaker cables LS-4004 AIR or LS-2404-AIR and which
have caused a sensation in the High End scene worldwide. The individual conductors are held at fixed distances by means of the specially developed clips and isolated from each other by air. The „air dielec-
tric" ensures low capacities between the conductors. The multicore design compensates for the interference and magnetic fields caused by the current peaks. This considerably minimises the line inductance.
In addition, the skin effect is greatly reduced by the large number of individual wires. This is caused by the steep current flanks that accompany high frequencies. By distributing the current over many wires,
the actual usable conductor cross-section is increased, in addition to a general increase in overall cross-section. Thanks to these technical refinements, the AC-1204 AIR is able to supply the components
with power even in extremely dynamic passages, and therefore can unleash the full potential of your electronics. As soon as electrical energy is transported, electromagnetic interference fields are inevitably
generated. To avoid this, the AC-1204 AIR is shielded with a dense braid of tinned copper. This especially protects the adjacent audio components and cables from radiating interference fields caused by the
high current peaks in the power cable. The many special features of the AC-1204 AIR therefore counteract all undesirable effects extremely well and make them what they are: outstanding energy pipelines
for perfect audiophile sounds.
Safety first:
Each Reference AC-1204 AIR cable is tested with the utmost care. In addition to the intensive function test, each cable is also subjected to an insulation and a high-voltage test. The results are recorded and
each cable is given a unique serial number.
FEATURES
• AIR Helix construction
• Air dielectric ensures extremely low capacitance
• 4 copper wires | total cross-section 2x1,5mm2
• Protective conductor (protection class 1)
• Dense shielding braid made of copper with
oxidisation protection (tin-plating)
• Unit-tested (function, insulation, high-voltage)
• CE conformant
• With certificate
• Made in Germany
Technical Data
• Temperature range: 0 – 40°C
• SCHUKO-C13/C15: 10 A 250 V AC
• SCHUKO-C19: 16 A 250 V AC
• US-C15: 10 A 125 V AC
• US-C19: 15 A 125 V AC
OPERATION
If your system consists of several components, we recommend measuring the phases of the sockets to which you connect your hi-fi devices. The aim is to attain a potential difference between the signal
masses of the devices that is as low as possible and thereby low compensating currents via the signal cable.
To measure the phases, the devices are initially only connected to the mains power supply and switched on without being connected to each other. Then the potential between the signal masses (e.g. earth
contact on the cinch sockets) is measured. After turning the mains plug round and repeating the measurement, you can determine in which position the potential is lowest. Observe the operating instructions
of the devices in this regard and ask your specialist retailer.
NOTE: Before you connect the devices with each other, it is vital that they are switched off and disconnected from the mains power supply.
Now connect the devices with each other. Please note the operating instructions of the devices. Plug the mains power cable first into the device and then into the socket. If you are using a socket strip, insert
the plug of the socket strip into the power supply socket last.
NOTES
Simplified EU Declaration of Conformity
Hereby, in-akustik GmbH & Co. KG declares that the equipment typ is in compliance with Directive LVD 2014/35/EU and RoHS 2011/65/EU. The full text of the EU declaration of conformity is available at the
following internet address: www.in-akustik.com
Important remark:
• Please also refer to further remark about this product on our homepage www.in-akustik.com.
• This product is NOT intended for the United States of America or territories that belong to the USA and must NOT be operated in these countries.
Misc
Indication without guarantee. All product images similar. We reserve the right to make changes.
in-akustik GmbH & Co. KG Tel.: +49 (0) 7634 5610-70
Untematten 12-14 Fax.: +49 (0) 7634 5610-80
79282 Ballrechten-Dottingen E-Mail: info@in-akustik.com
GERMANY Web: www.in-akustik.com
Scope of delivery
• 1 x mains connection cable
• 1 x operating instructions
• 1 x warning card (do not bend, do not subject to load, indoor use
only, solely for connecting stationary hi-fi and high-end entertainment
electronics devices)
Basic-Version C19 Basic-Version C15
MA DE IN
G E R MAN Y
Basic-Version SCHUKO
r