Operating Determinations; Installation - EuroLite 80901125 Bedienungsanleitung

Features
Pull-down screen with spring-roller
• Manual Wall Screen for XXL entertainment
• Projection screen in 16:9 aspect ratio
• Gain-factor of 1.0 for universal use
• Screen type D (diffuse) for even light reflection
• Matt, white canvas for genuine projections
• Bar-tensioned canvas to keep the fabric flat and immobile
• With surrounding black border top, bottom, right and left
• Suitable for all LCD-beamers and DLP-beamers
• Light-proof due to black back
• White steel-sheet housing in a modern look
• Stepless height adjustment
• For wall or ceiling mounting
• For home cinema, party room etc.

OPERATING DETERMINATIONS

This device is a projection screen for displaying projections. This product was designed for indoor use only.
Do not shake the device. Avoid brute force when installing or operating the device.
When choosing the installation-spot, please make sure that the device is not exposed to extreme heat,
moisture or dust.
This device must never be operated or stockpiled in sourroundings where splash water, rain, moisture or fog
may harm the device. When using smoke machines, make sure that the device is never exposed to the
direct smoke jet and is installed in a distance of 0.5 meters between smoke machine and device. The room
must only be saturated with an amount of smoke that the visibility will always be more than 10 meters.
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation!
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like
crash, burns, etc.

INSTALLATION

The projection screen should be installed in a way that all spectators have a perfect viewing angle.
Define the installation height from the screen use. If you want to install the screen for a sitting audience, the
screen's bottom should be at eye's height of the sitting spectator.
The installation angles of the projection screen must always be frictionally and form locking connected! The
housing must not be additionally stressed mechanically. When installing the screen make sure that the
housing is not twisted.
8/10 00037003.DOC, Version 2.2