Operation Manual / 4 Product description / A130-M.. - A145-M..
8
Demontieren und montieren
8.10
Rotorblock drehen und fixieren
Abbildung 39: Rotorblock drehen und fixieren
1. Hebezeug von Ringmuttern entfernen.
2. Ringmuttern (VRM) und Schrauben vom Servicesupport entfernen.
3. Service Support (90012) in Rotorblock einführen.
4. Muttern montieren.
5. Rotorblock auf Service Support (90012) drehen.
© Copyright 2015 ABB. All rights reserved.
HZTL4031_DE
Seite 86 / 115
Revision C
February 2016