Herunterladen Diese Seite drucken

Sjobergs ORIGINAL 1100 Aufbauanleitung Seite 2

4-station

Werbung

Utfärdare:
Art.nr:
701227
PIBL
MED GASFJÄDER ART. 33142
WITH GAS SPRINGS ART. 33142
MIT GASFEDERUNG ART. 33142
ISO
9001
Datum:
2020-03-31
VIKTIGT
Vid montering utan gasdämpare måste vredet i benen bytas mot
en M-12 bult, detta är nödvändigt för att minimera skaderisken.
Denna bult finns inte med i leveransen.
IMPORT NT
When assembling the trestle without gas springs, the handle on
the leg must be replaced with an M12 bolt. This is necessary to
minimize the risk of injury.
These bolts are not included.
WICHTIG
Bei Montage ohne Gasdämpfer muss der Handgriff an
den Beinen mit einer M12-Schraube ausgetauscht werden,
um ein eventuelles Schadensrisiko zu minimieren.
Die M12-Schrauben sind nicht Teil des Lieferumfanges.
SJÖBERGS WORKBENCHES AB
ISO
SE- 576 95 Stockaryd • Sweden
14001
Tel +46 (0)382-257 00
office@sjobergs.se • sjobergs.se
Dokumentnamn:
MB. 74
VIKTIGT
Vid montering utan gasdämpare måste vredet i benen bytas mot en M-12 bult,
detta är nödvändigt för att minimera skaderisken.
Denna bult finns inte med i leveransen.
IMPORTANT
When assembling the trestle without gas springs, the handle on the leg must be
replaced with an M12 bolt. This is necessary to minimize the risk of injury.
These bolts are not included.
WICHTIG
Bei Montage ohne Gasdämpfer muss der Handgriff an den Beinen mit einer
M12-Schraube ausgetauscht werden, um ein eventuelles Schadensrisiko zu
minimieren.
Die M12-Schrauben sind nicht Teil des Lieferumfanges.
Utgåva:
10
8x100
(x4)
Sida:
2-2

Werbung

loading