Evervue MirrorVue RM200 Bedienungsanleitung Seite 2

RM200 and RM250
Batterie wechseln
Knob
Dust Cap
Cover
Base
Open the Dimmer.
1
Carefully remove the parts of the dimmer piece by piece. Start
with the knob followed by the dust cap then the cover.
Attaching the remote to a wall
Knob
Dust Cap
Cover
Base
Open the Dimmer.
1
Carefully remove the parts of the dimmer piece by piece. Start
with the knob followed by the dust cap then the cover.
Evervue GmbH
Mainzer Landstr. 50
D-60325 Frankfurt, Germany
Insert a 20mm Coin Cell Battery
2
Insert a 20mm Coin Cell Battery into the remote. Ensure that the battery
is placed correctly to match the corresponding positive or negative
sign, otherwise it would not work.
Screw the base to the wall.
2
Take the base of the dimmer and screw it securely on the wall.
Then proceed to assembling the dimmer back.
Änderungen der Informationen ohne vorherige Ankündigung vorbehalten.
© Copyright 2001-2009. Evervue GmBH, www.evervue.de
Schicken Sie uns eine E-Mail an support@evervue.com
20mm