Renkforce 1407478 Bedienungsanleitung Seite 2

G Operating instructions
Solar pond aerator 0.8 Watt
Item no. 1407478
Intended use
The product is used to improve the oxygen supply of a water pond. For this purpose,
the product is placed in the pond and floats due to the integrated rigid foam ring.
Depending on the exposure to sunlight, a solar module generates electricity for the
integrated air pump. Using a hose (can be shortened depending on the water depth),
the air is passed to an aerator stone that generates small air bubbles.
Please read these operating instructions carefully to ensure safe use and operation of
the product. Keep these operating instructions in a safe place for future reference. If
you pass the product on to a third party, please pass on these operating instructions
as well.
Always observe the safety instructions and all other information included in these op-
erating instructions.
This product complies with the applicable national and European requirements. All
names of companies and products are the trademarks of the respective owners. All
rights reserved.
Package contents
• Solar module
• Air stone
• Airline tubing
• Operating instructions
Up-to-date operating instructions:
1. Open www.conrad.com/downloads in a browser or scan the
displayed QR code.
2. Select document type and language and enter the item num-
ber into the search field. After submitting the query you can
download displayed records.
Explanation of symbols
This symbol indicates specific risks associated with handling, operation or
use.
The arrow symbol indicates special tips and operating information.
Safety instructions
Damage due to failure to follow these operating instructions will void the
warranty! We do not assume any liability for any resulting damage!
We do not assume any liability for personal injuries and material damages
caused by the improper use or non-compliance with the safety instruc-
tions! In such cases, the warranty will be null and void!
• The unauthorised conversion and/or modification of the product is not
permitted for safety and approval reasons (CE).
• The product is not a toy and does not belong in the hands of children.
• Use the product in a water pond only; do not use in other liquids.
• The product must be removed from the pond during periods of frost since
it will be damaged otherwise.
• Do not leave packaging material carelessly lying around, since it could
become a dangerous plaything for children.
• Handle the product with care; it can be damaged by impacts, blows, or
accidental falls, even from a low height.
• If the product appears damaged, do not use it. Instead have it checked/
repaired by a qualified technician or dispose of it in an environmentally
friendly manner.
• If you have any questions that are not answered in these operating in-
structions, please contact our technical department or another specialist.
Getting started
• Measure the water depth at the operation
location of the pond aerator and cut the
hose provided to the corresponding length
using sharp scissors or a knife, if neces-
sary.
Make sure that the aerator stone
does not sink to the bottom of the
pond but floats freely in the water.
• Attach the aerator stone to one end of the
hose.
• Connect the other end of the hose with the air outlet of the air
pump.
• To prevent the pond aerator from drifting, you can attach a
string to one of the 6 hooks at the bottom of the pond aerator,
see arrow in the figure on the right.
• Now place the pond aerator in the water in such a way that the solar module points
upwards.
If the amount of sunlight is sufficient, the air pump will start and bubbles will emerge
from the aerator stone introducing oxygen into the water.
Therefore, the pond aerator should always be placed in a location in the
pond that is exposed to sunlight for long periods of time.
The air suction opening is located in the middle of the solar module.
If a small amount of water gets into the suction opening (e.g. during rain), it will be
forced through the aerator stone by the air pump.
Take the pond aerator out of the pond during frost to avoid damage.
Store in a dry, clean and dark room so that the air pump cannot start (cover
the solar module, if necessary).
Maintenance and cleaning
The product requires no servicing on your part apart from occasional cleaning of the
solar module surface.
Only use a clean, soft cloth moistened with water for cleaning.
Never use aggressive cleaning agents, as these can cause discolouration. To prevent
scratch marks, do not press too strongly on the solar module surface when cleaning.
Algae can form on the aerator stone after a longer period of operation. They can be
removed with a soft brush. Then, check the function of the aerator stone in a bucket
filled with water (direct the solar module towards the sun). If only few air bubbles
appear (despite sufficient exposure of the solar module to sunlight), the aerator stone
must be replaced with a new one.
Disposal
The product must not be disposed of in household waste!
Please dispose of the product, when it is no longer of use, according to the
current statutory requirements.
Technical data
Capacity of the solar module ............max. 0.8 W
Amount of air .......................................max. 150 l/h
Water temperature .............................+10 °C to +30 °C
Length of hose .....................................approx. 50 cm (can be shortened)
Dimensions...........................................265 x 50 mm (Ø x H)
Weight ...................................................approx. 380 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent
the technical status at the time of printing.
© Copyright 2016 by Conrad Electronic SE.