Technical Data - AER The Acoustic People Colourizer 2 Bedienungsanleitung

7. Technical Data

nput
Combo socket, XLR + 1/4" (6.35 mm)
line mode High impedance, unbalanced jack input
for instruments (pick-ups)
and line level sources
(tip = hot per AES standard)
Gain Range:
+8 dB to +20 dB
Input Impedance: 2.2 MOhm
max. Input level:
10 dBV (0.1% THD at 1 kHz, unbalanced)
Equivalent Input noise:
< -108 dB (22 kHz BW,
Gain=20 dB, Rs=20 Ohm, re 0 dBV, Line out)
SNR:
< -98 dB (22 kHz BW, Gain=8 dB, Rs=20 Ohm,
re +10 dBV, Line out)
Dynamic Range:
> 117 dB (22 kHz BW,
Gain=8 dB, Rs=20 Ohm,
re +10 dBV, Line out)
Frequency Response:
10 Hz to 45 kHz (+0/-3 dB, Gain=20 dB,
Line out)
THD + N:
<0.012 % (22 Hz-22 kHz BW, Gain=20 dB,
Rs=20 Ohm, 0 dBV, Line out) Rs=20 Ohm, 0 dBV, Line out)
mic mode Balanced XLR input for microphones mic mode
(Pin 2 = hot per AES standard).
Gain Range:
+10 dB to +56 dB (0 dBV Line Out at 1 kHz)
Input Impedance: 1 kOhm
max. Input level:
10 dBV (0.1% THD at 1kHz unbalanced)
Equivalent Input noise:
< -130 dB (22 kHz BW, Gain=56 dB,
Rs=150 Ohm, re 0 dBV, Line out)
SNR:
< -96 dBV (22 kHz BW, Gain=10 dB,
Rs=150 Ohm,
re 0 dBV, Line out)
Dynamic Range:
> 117 dB (22 kHz BW, Gain=10 dB,
Rs=150 Ohm,
re 0dBV, Line out)
Common-mode rejection ratio (CMRR):
> 126 dB (at 1 kHz, Gain=56 dB,
Rs=150 Ohm,
re 0 dBV, Master out)
Frequency Response:
10 Hz to 45 kHz (+0/-3 dB,
Gain= 56 dB, Line out)
THD + N:
<0.025 % (22 Hz-22 kHz BW, Gain=56 dB,
Rs=150 Ohm, 0 dBV, Line out)
Phantom-Power:
24 V switchable, 10 mA , 1.2 kOhm
Impedance
Clip indicator: Headroom 8 dB (red LED}
line out 1/4" (6,35 mm) mono jack socket
(unbalanced).
Output Impedance: 47 Ohm
max. Output level:
19 dBV (0.1 % THD at 1 kHz, unbalanced).
DI-out
Balanced XLR output (Pin 2 = hot
per AES standards)
Output Impedance: 50 Ohm
max. Output level:
+10 dBV (0.1% THD at 1 kHz, balanced,
20 dB adjustable).
13