Connecting A Mobile Device; Connecting Via Bluetooth - Samsung HW-N400 Handbuch

07 coNNectING a mobILe DeVIce

connecting via bluetooth

When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of
cabling.
• You cannot connect more than one Bluetooth device at a time.
bluetooth device
the initial connection
1. Press the (Source) button on the right side panel or on the remote control, and then select
"bt".
2. Change "bt" to "bt PaIrING".
• When "bt reaDy" appears, press the
the (Source) button on the right side panel of the Soundbar for more than 5 seconds to
display "bt PaIrING".
3. Select "[aV] Samsung Soundbar Nxxx N-Series" from the list that appears.
• When the Soundbar is connected to the Bluetooth device, [bluetooth Device Name] → "bt"
appears in the front display.
4. Play music files from the device, connected via Bluetooth, through the Soundbar.
Note
• After you have connected the Soundbar to your mobile device the first time, use the "bt reaDy"
mode to reconnect. See Page 8 for details.
If the device fails to connect
• If a previously connected Soundbar listing (e.g. "[aV] Samsung Soundbar Nxxx N-Series") appears
in the list, delete it.
• Press the PaIr button on the remote control or in "bt" mode, press and hold the
button for more than 5 seconds on the right side of the Soundbar to switch to "bt PaIrING" mode.
Then, select "[aV] Samsung Soundbar Nxxx N-Series" from the Bluetooth device search list.
for more information about bluetooth connections, refer to "connecting a tV via
bluetooth" on pages 7~ 8.
PaIr button on the remote control or press and hold
ENG - 12
(Source)