Werbung
Verfügbare Sprachen
Verfügbare Sprachen
•
Keep remotes out of reach of children.
•
Remote controls may only be operated by persons who are familiar with the system and have been instructed in their function.
Use the remote control only when you are in sight of the door / gate.
•
Coding in remote controls must always be carried out within the vicinity of the door operator. Use only original parts.
•
Protect remotes from rain, snow, sunlight or dust, otherwise the function of the transmitter may be impaired
•
•
To replace the battery, unscrew the screws on the back of the remote.
•
The original remote control and the pairing Jane remote must have the exact same frequency!
Programming:
1.
Press and hold a button on the Jane remote control that you want to program. (do not release this
button! If you release the keys after each step you will have to repeat the procedure!)
2.
As soon as the LED on the Jane remote starts to flash, hold the Jane remote and your original remote
as shown on the first picture.
3.
Press and hold the programmed button on your original remote control.
4.
When the Jane remote has received the code, the LED will remain lit for 3 seconds and then go out.
5.
You may now release both buttons and operate your opener/operator.
If the transfer of the code didn't work, try holding the Jane remote and your original remote in
one of the other positions as depicted above (try also holding the remotes back to back).
Warranty: 24 months – Manufacturing and technology 100% made in Italy – Patented product
The undersigned Luigino Pellattiero, legal representative of ITALFILE srl, declares that the remote control JQxxx-2/JQxxx-4, manufactured in 2011
Directive 2002/95/CE – known as the RoHS Directive – And therefore complies with current standards.
or
Programming video:
can be found at
Simplified EU Declaration of Conformity (CE)
Compliance statement
was assembled in compliance with the following standards:
Directive 2004/10/CE – know as the Electromagnetic Compatibility Directive
Luigino Pellattiero – Vincenza, 1.10.2011
a trademark of bau-shop-24 GmbH
Fritz-Müller-Strasse 115
73730 Esslingen, Germany
Frequency: 27.015 MHz/ 40.685 MHz/ 26.975 MHz/ 26.995 MHz
www.schartec.de/en/
Schartec
Remote Control Jane Q
Battery: 12 V alkaline
Working temperature: -40°C - +50°C
or
dbm: 10
Channels: 4
Werbung
