Werbung
Verfügbare Sprachen
Verfügbare Sprachen
IMPORTANT INFORMATION
Item no. 1503010
General safety instructions for Monitor holders
Dear customer!
As well as providing ergonomic improvement while you are working or playing, monitor holders
also create space.
Depending on which monitor holder you have, your monitor can be adjusted in height, tilted
or even rotated. In this way, the optimal adjustment of your monitor can be made to suit your
needs.
When fixing it to a table top or a wall (depending on the design of the monitor holder), however,
there are a few important safety instructions which must be observed. Therefore, please read
the following sections carefully.
General
• A monitor holder is not a toy. Therefore, keep the product out of the reach of children.
• Do not leave packaging material carelessly lying around, since it could become a dangerous
plaything for children.
• The product is intended for use in dry indoor spaces only.
• Verify that the delivery content is complete before assembling the product. Do not assemble
the product if the delivery content is not complete.
• Selecting an unsuitable installation location can lead to personal or material damage!
• Proceed with care when assembling and installating the product! The product has some
sharp edges. There is a risk of injury!
• Carry out only the work on the monitor holder that is necessary in order to install it (or to
change its location). Never dismantle the monitor holder and never attempt to convert it
or to repair it in any way. Some monitor holders contain highly pre-stressed metal springs.
Dismantling such a monitor holder in the wrong way could cause you severe injury!
• Before beginning the installation process, check whether there are appropriate mounting
options for a monitor holder on the back of your monitor.
• It is usually necessary to remove the monitor's base before mounting the monitor on a
monitor holder. Please consult the operating instructions for your monitor.
Lay the monitor flat with its screen side down onto a soft, clean pad or cloth, so that there is
no pressure on the screen and the screen does not get scratched. Protect valuable furniture
surfaces during installation by using a suitable pad or cloth.
Remove the monitor's base; depending on the monitor's design, this will either be screwed
or clipped in.
• When fixing the monitor holder to the back of the monitor, make absolutely certain that you
use the correct screws. Not only must these be of the correct thread type for the monitor, but
they must also not be too long; otherwise they will damage the monitor.
The screws must not be too short, however, since otherwise the connection will not be secure.
The screws must be screwed into the threaded fixture holes on the monitor with at least 5
full 360° turns. The correct screws are usually supplied together with the monitor holder or
with the monitor. Occasionally, however (depending on the monitor type), other screws are
required; these can be purchased from specialist retailers.
Do not use any force when tightening the screws; otherwise the monitor may be destroyed,
leading to loss of warranty/guarantee!
If you have any doubt about the correct length of the screws required, we recommend that
you contact the monitor manufacturer or an appropriate specialist.
• Depending on the size and design of the monitor and monitor holder concerned, it is sensible
for a second person to help with the installation. This person can hold the monitor still, for
example, while you are attaching the monitor to the monitor holder.
• Apply your full concentration when carrying out the installation, because if the monitor and/or
monitor holder were to fall, this could cause expensive damage to the equipment and there
is the potential danger of personal injury!
• Lay all the monitor's cables in such a way that they do not get jammed or kinked in the
monitor holder.
• Check all the screw fittings from time to time. Adjusting the position of the monitor and/or
the monitor holder and moving them can sometimes cause the screws to become loose
over time.
• Do not exert any force when moving/adjusting the monitor and/or monitor holder, as this
could damage the monitor.
• When moving/adjusting, do not press on the monitor's screen!
• Do not overload the monitor holder. Pay attention to the details provided by the manufacturer
for the maximum monitor weight and/or its size.
• Do not use the monitor holder to support yourself or to hold onto.
• Do not fix any objects to the monitor holder other than the monitor for which it was intended.
• If you are in any doubt, do not carry out the installation yourself; ask a qualified person to
do it for you.
Table Mounting
The following information is relevant for monitor holders that must be
mounted on a table top.
• Attach the monitor holder only to a sufficiently stable, horizontal table top. Tables made of
glass, ceramic or stone slabs or thin plastic-coated wooden-fibre slabs, are categorically
unsuitable for attachments.
Furthermore, you must not attach the monitor holder to shelves or similar unstable or
unsteady surfaces.
• Attach the monitor holder only at a position on the table top that is suitable for this purpose.
Consider the significant lever action involved!
• The weight of the monitor and monitor holder as well as its fixed position and significant lever
action can all cause pressure marks on the table top. For this reason, we do not recommend
that you mount it on valuable furniture items!
• For safety reasons, the monitor holder and the monitor that is attached to it should be situated
only above the table surface. The design of many monitor holders means that it is not suitable
for the monitor arm to be situated anywhere other than above the table surface. There is also
a danger of it toppling over in certain circumstances!
• Ensure that the monitor holder is fixed to the table top securely. Otherwise it could slip off
the table top when you are moving the monitor and the monitor holder. As well as causing
material damage, this poses a danger of personal injury!
Wall Mounting
The following information is relevant for monitor holders that must be
mounted on a vertical wall.
• Wall-mounting is permissible only where the wall concerned is of the correct type and
condition. Lightweight partition walls or those made from gypsum boards are normally
unsuitable. However, specialist retailers do sometimes stock special dowel fittings for such
installation locations. If you are in doubt, ask a specialist before installation.
Depending on the base wall material (e.g. concrete), suitable mounting materials must be
used (screws, dowels, etc.); these are not normally supplied with the monitor holder!
Due to the weight of the monitor and monitor holder and the lever action involved, ensure that
screws are fixed securely.
• Plan the installation location carefully, so that the monitor holder with the monitor fixed to it
will be situated at the correct height when you have finished.
• Use a spirit level to assist you with mounting the monitor holder on the wall correctly.
• Make certain when drilling and tightening the screws that no cables or pipes are damaged.
Inadvertently drilling through electric cables causes the life-threatening danger of an electric
shock!
Pay special attention to your safety when using electric tools (e.g. a drill).
• Make certain when mounting the product on a wall that nobody is situated in the area
underneath the monitor holder and/or monitor.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2016 by Conrad Electronic SE.
*1503010_tv_mon_mount_V1_1016_02_hs
Werbung
