Operation; Maintenance - KIKKA BOO SWAY ME Gebrauchsanweisung

IV. REMOTE CONTROL FUNCTION(SELECTIVE)
1. Power; 2. 5 speed; 3. 3 timer; 4. 12 songs; 5. Volume(+); 6. Motion button; 7. Close timer; 8. 5 natural songs; 9. Volume(-);10. Mute; 11. BUTTON BATTERY
CR2025 3V(including);
V. ASSEMBLY
5.1. Open the xing hook and make the foot frame down.
5.2. At the same time, lift foot fram on both sides until folding buttons pop up.
5.3. Hang the hook.
5.4. Open the cradle up and push down from the middle of the mattress untilthe folding buttons on both sides pop up.
5.5. Installation completed.
VI. OPERATION
This product can be folded for convenient storage and transportation.
6.1. Press and hold the folding buttons on both sides of the basket and lift it up,then fold down the surrounding frames on both sides to complete the folding of
the basket.
6.2. Pull up the folding handles on both sides of the bracket at the same time to lower the crib, and then fold up the feet on both sides to completely fold the whole
bed.
6.3. Hang the xing hook.
6.4. Put the baby crib close to adult bed as shown in below photo, please ensure height of mattress in baby crib is lower than mattress in adult bed, then x the two
beds through fasten belt within the pocket under baby crib:
A. Adjust fasten belt length to the width of adult bed mattress.
B. Take the metal plate of fasten belt through bottom of adult bed mattress and x it on the other side of adult bed(opposite to baby crib).
C. Lock the plastic safety buckle on the xing belt around the mattress.
WARNING: When connecting the adult bed for use, in order to adapt to the height of the adult bed, it is necessary to ensure that the two legs of the product stay at
the same height, and x the product and the mattress rmly with the provided xing belt, so that there is no gap between the product and the adult bed.
VII. ADJUST THE HEIGHT
The height of the crib can be adjusted upward by gently lifting both sides of the bed. The height of the crib can be adjusted downward by pressing the height
adjustment button or both sides and make cradle down, after the bed is placed down about 5cm release the buttons.
WARNING: Do not adjust the height of the bed when the baby uses this product.
This product can swing by hands. Push down the anti swing button, crade can swing push up, push down the anti swing.
WARNING: When using the swing function, please set the height of the crib to the minimum.
VIII. CONNECTING
This product can be connected to the adult' s bed.
WARNING: For you child' s safety, please read this step carefully.
Connecting to adult' s bed, ensure both adult bed and this product are suitable following situations.
• The mattress height of this product and the adult' s bed must be adjusted to the same level, then completely connected without gap.
• The strap is fuxed together. The side connecting adult bed must be straight.
• Please check carefully to ensure normal use of adult bed not a ected when the product connected to it.
• Please con rm that the sheels, blankets and other items on the adult bed are notc overed on this product.
Operation step:
8.1.Pull the zippers at both end of mesh windows to the lowest position.
8.2. Push inward both buttons at the upper end of zippers at the same time, hold this operation for a while. Meanwhile,lift the supporting rod to open the sides.
8.3. Insert the two ends of supporting rod into the elastic buckle at both ends of
basket bottom.
IX. MAINTENANCE
• The mattress cover and fabric lining are removable and washable.
• Disassembly and assembly of this product can only be completed by adults.
• Please take care not to damage this product during disassembly and assembly.
• If there is any damage to the components of this product, please do not use this product again, and place this product away from children.
• When washing mattress cover and fabric lining, do not use dissolvable and corrosive articles.
ENGLISH