Conrad 1194424 Bedienungsanleitung Seite 2

USB MINI DESKTOP FRIDGE
Item no. 1194424
Intended use
The USB mini desktop fridge is designed to chill or keep cool canned drinks of a suitable size (e.g. 330 ml
aluminium can or similar). This product is only intended for private use in the home. The power supply is
provided via a USB port on a computer or a USB hub with a power adaptor. A separate USB power adaptor
that can deliver a current of at least 1000 mA and that is equipped with at least two USB ports can also be
used. The USB mini desktop fridge can be turned off and on using the on/off switch. When the blue LED in
the upper section of the USB mini desktop fridge is illuminated, this indicates that the fridge is in "cooling"
mode.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you use the
product for purposes other than those described above, the product may be damaged. In addition, improper
use can cause hazards such as short circuiting, fire, electric shock etc. Read the instructions carefully and
keep them. Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
Delivery content
• USB Mini Desktop Fridge
• Operating instructions
Safety instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
a) Persons / Product
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become dangerous
playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it from
any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
• Also observe the safety and operating instructions of any other devices which are connected
to the product.
• Only connect the power adaptor to a normal mains socket connected to the public supply.
Before plugging in the power adaptor, check whether the voltage stated on the power adaptor
complies with the voltage of your electricity supplier.
• Never connect or disconnect power adaptors if your hands are wet.
• The power supply used must be sufficient (see "Technical data").
• The device is not designed for cooling unpackaged food or food that is stored in unsuitable
packaging.
• Do not leave the device unattended when in use.
• Do not cover the device while it is in use.
b) Miscellaneous
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modifications and repairs are to be performed exclusively by an expert or at a
qualified shop.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
Operating elements
2
3
1
Version 07/14
1 On/Off switch
2 LED "Cooling" status indicator
3 Door (front)
Operation
a) Connecting the USB mini desktop fridge to a USB power supply.
1. Using the USB power cable supplied, connect the USB mini desktop fridge to a suitable power supply
(e.g. computer USB port, USB port on a USB hub with individual power adaptor or a power adaptor
with USB power socket). Both USB connectors must be inserted to guarantee that the device is fully
functional.
b) Operation
1. Place the USB mini desktop fridge on a flat, vibration-free surface.
2. Place the front side (with the hinge) in a position where the door (3) can be easily opened.
3. Place the items to be cooled directly onto the metal plate.
Ensure that residual packaging such as paper, plastic film or cardboard cannot prevent the
items from being cooled.
4. Turn the USB mini desktop fridge on/off with the on/off switch (1). Cooling begins or ends.
5. The blue LED status indicator (2) illuminates when the USB mini desktop fridge is turned on.
6. Always turn the USB mini desktop fridge off and remove the USB connection when not in use.
Maintenance and cleaning
• First disconnect the USB mini desktop fridge from the power supply by removing the USB connector from
the USB power supply.
• Maintenance or repair may only be carried out by a qualified technician or service centre. Under no
circumstances must components in the interior of the device be serviced by you. For this reason, never
open or dismantle these components.
• The device can be cleaned with a dry, soft and clean cloth. Do not press too hard on the device housing;
this can cause scratches.
• Dust can be easily removed using a long-haired, soft and clean brush and a vacuum cleaner.
• Never use abrasive cleaning materials, rubbing alcohol or other chemical solutions, as these can corrode
the housing or even impair the normal functioning of the device.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product according to the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
Operating voltage ................... 5 V/DC (via USB)
Current consumption .............. 1000 mA
Operating conditions ............... -10 to +70 °C, 0 - 85 % RH (non-condensing)
Storage conditions .................. -10 to +80 °C, 0 - 95 % RH (non-condensing)
Maximum cooling volume ....... 1.3 litres
Cooling temperature ............... 8 - 12 °C below ambient temperature
USB cable length .................... approx. 140 cm
Dimensions (W x H x D) ......... 130 x 210 x 110 mm
Weight .................................... 400 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
(www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming,
or the capture in electronic data processing systems require the prior written approval by the editor.
Reprinting, also in part, is prohibited. This publication represent the technical status at the time of
printing.
© Copyright 2014 by Conrad Electronic SE. V1_0714_02-DS