Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Surge protected 6 socket power strip
Item no. 70 86 29
Intended use
Use this power strip to turn on/off connected devices using the built-in ON/OFF main switch. The surge
protection indicator lamp lights up to show that all connected devices are protected against electrical power
surges. The total power consumption of all connected devices may not exceed 3680 W. The product may be
used in dry, closed indoor spaces only.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you use the
product for purposes other than those described above, the product may be damaged. In addition, improper
use can cause hazards such as short circuiting, fire, electric shock etc. Read the instructions carefully and
keep them. Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Power strip
• Operating instructions
Safety instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
a) Persons / Product
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become dangerous
playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it from
any accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
• Also observe the safety and operating instructions of any other devices which are connected
to the product.
• The power strip is equipped with a child safety device. The device will only release the socket
openings, if both pins of a plug are inserted into the socket simultaneously. Still exercise caution
when using the product in the vicinity of children. Children cannot recognize the hazards posed
by improperly using electrical devices. This poses a risk of fatal injury due to electric shock!
• Only use a properly installed mains outlet of the public power supply (230 V/AC, 50 Hz) as a
power source.
• The mains outlet must be located near to the device and be easily accessible.
• Unwrap the power cable fully during use. The power cable may not be squashed or damaged
on sharp edges. Do not place any objects on the cable and do not step on the cable. Lay the
cable so that no one can accidentally trip over it and so that the plug is easily accessible. Do
not lay the cable under rugs, etc.
• Never touch, use, plug in or unplug the product with moist or wet hands. This poses a risk of
fatal injury due to electric shock!
• Never connect the product to the mains directly after moving it from a cold to a warm room (i.e.
during transportation). This may cause condensation, which can destroy the device or lead to
electric shock. Let the product first reach room temperature. Wait until all condensation has
evaporated – this may take up to several hours. Only now may the product be connected to
the power supply and operated.
• Only unplug a power plug by pulling on the provided grips, never pull on the power cable to
unplug the device.
• Do not overload the power strip. Heed the power rating in the chapter "Technical data".
• Do not connect the product in series! This may overload the power strip. This poses a fire
hazard! Connect the power strip's safety plug directly to a mains outlet. Do not connect any
more power strips to the product.
• Do not operate the power strip covered! The higher the connected load, the more the power
strip and power cable will warm up, which can cause overheating and possibly a fire if the
product is covered.
• The power strip is voltage-free only once it is unplugged.
Version 11/13
• Unplug the product under the following conditions:
- before cleaning the product
- in case of a storm
- for extended periods of disuse.
• Never pour liquids above or near the product. This poses a great risk of fire or fatal injury due
to electric shock. Should any liquid enter the device interior, turn off the mains outlet to which
the power strip is connected entirely (fuse/automatic circuit breaker/residual current-operated
device). Now unplug the power strip and contact a professional. Discontinue use of the product.
• In industrial facilities, heed all applicable accident prevention regulations for electrical
installations and equipment.
• The use of electrical devices must be supervised by trained staff in schools, training centers,
hobby and do-it-yourself workshops.
b) Miscellaneous
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modifications and repairs are to be performed exclusively by an expert or at a
qualified shop.
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
Installation
Do not bend or squash power cables. Doing so may cause malfunction, short-circuit or damage
to the product. Make sure not to damage any cables or power wiring when drilling holes in the
wall or screw mounting to predrilled holes.
When choosing an installation site, take into consideration that the power strip may only be
installed to a smooth, non-flammable and dry surface.
On both sides of the power strip, there are mounts with drilled holes. Mount the power strip using suitable
fastening material to a secure and even surface (i.e. a wall) as needed.
Operation
Make sure that the power strip is voltage-free before connecting devices.
• Plug the power strip plug to your mains outlet.
• Plug in up to six devices to the power strip outlets.
• Now turn on the power strip by pushing the ON/OFF main switch. When the device is on, the red power
indicator in the ON/OFF main switch lights up.
• The surge protection indicator lamp lights up to show that surge protection is active. If the indicator lamp
is not lit, surge protection is not active.
Maintenance and cleaning
• This product does not require maintenance. There are no components located inside the product you need
to maintain. Never open/dismantle the product. Have maintenance and repairs done by qualified experts
or repair shops only.
• Always disconnect the product from the mains before cleaning. Then disconnect all connected devices
from the power strip.
• To clean the product, a dry, soft and clean cloth is sufficient. You can use a long-haired, soft and clean
brush and a vacuum cleaner to remove dust.
• Never use any aggressive cleaning agents or chemical solutions to clean the product. Such cleaning
products may attack the housing or cause malfunction.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product according to the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
Connection data ............................................230 V/AC (max. 250 V/AC), 50 Hz, 16 A, max. 3680 W
Safety sockets ...............................................6, with built-in child safety device
Leakage current .............................................max. 13500 A
Cable length ..................................................1.5 m
Dimensions (W x H x D) ................................476 x 49 x 67 mm
Weight ...........................................................approx. 720 g
These operating instructions are published by Conrad Electronic SE, Klaus-Conrad-Str. 1,
D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming,
or the capture in electronic data processing systems require the prior written approval by the editor.
Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in
technology and equipment reserved.
© Copyright 2013 by Conrad Electronic SE.
V2_1113_02-KV
Werbung
