Scosche MAGICGRIP Bedienungsanleitung Seite 7

WIRELESS
CHARGING
Plug the magnetic mount into
your vehicle's 12V socket using
the included USB-C cable and 12V
power adapter as shown (A & B).
Optional: Attach the included adhesive clips (C) to the dash
or console to secure the cable.
LED INDICATOR
& AMBIENT LIGHT SENSOR
The LED indicator band around the edge of the mount (A)
illuminates as shown in the chart below. The ambient light
sensor (B) increases the LED's intensity in bright conditions
and decreases the LED's intensity in low light conditions.
-..- .. t-H J.;
Power On
Standby
Charging
Protection Mode
A
�
��-
Illuminates RED, PURPLE & BLUE
OFF
BLUE
Blinking RED