Werbung
Verfügbare Sprachen
Verfügbare Sprachen
O P E R A T I N G I N S T R U C T I O N S
USB network adaptor for Wii + PC
Item no. 98 61 42
Intended use
The product is designed to be connected and operated on a Nintendo Wii's or a computer's
USB port. It provides a 10/100 MBit network port there.
Power supply is via the USB interface.
Always observe the safety instructions and all other information included in these operating
instructions.
This product complies with the applicable National and European requirements. All names of
companies and products are the trademarks of the respective owner. All rights reserved.
Package Contents
• USB network adaptor
• CD with driver
• Operating Instructions
Features
• USB2.0
• RJ45 network port 10/100MBit
• 2 LEDs; orange for notifying data transmission and green for a transmission rate of 100 MBit
Safety Instructions
Please read all the instructions before using this device; they contain impor-
tant information on its correct operation.
The warranty will be void in the event of damage caused by failure to ob-
serve these safety instructions! We do not assume any liability for any con-
sequential damage!
Nor do we assume any liability for material and personal damage caused by
improper use or non-compliance with the safety instructions! The warranty
will be void in such cases.
• The unauthorised conversion and/or modifi cation of the product is not permitted for
safety and approval reasons (CE). It must not be opened or dismantled! It does not
contain any internal parts that need to be adjusted or maintained by you.
• The product is only intended for use in dry, indoor locations.
• Protect the product from direct solar radiation, strong heat (>35°C), cold (<0°C),
dust and dirt, splashes and dripping water, vibrations or mechanical loads.
• When the product is taken from a cold room to a warm one (e.g., during transport),
condensation may form. This could damage the product.
Wait until the product has reached room temperature before using it. This may take
several hours.
• Do not leave packaging material carelessly lying around since it could become a
dangerous plaything for children.
• Handle the product with care. The product can be damaged if crushed, struck or
dropped, even from a low height.
• If you have any questions that are not answered in this instruction manual, please
contact our technical support centre or consult a professional.
General Information
☞
The product is compatible with Windows (XP, Vista and 7) as well as Nintendo Wii
and Mac OS X above version 10.4.
Please follow your Wii manual as well for installing on your Nintendo Wii.
Drivers are also included on the CD for installing on Mac OS X. Please follow the
manufacturer's English instruction manual.
Connection and confi guration on a PC running on Windows
www.conrad.com
☞
Version 10/11
• Switch on your computer and wait until the operating system has booted up completely.
• Now, insert the CD in the appropriate drive of your computer.
• If autoplay is enabled, the setup starts automatically. If this should not be the case, start the
fi le "Setup.exe" fi le in the main index of the CD manually.
• A pop-up window appears. In order to install the driver, click "yes" here.
• Depending on the operating system, a security message is displayed. You must acknowledge
this with "yes" as well.
• The driver is now installed automatically. Click on "fi nish" fi nally.
• Now, pull the USB connector from the product holder and connect this to a free USB PORT
on your computer.
• Windows now searches automatically for the driver and installs it. This takes a few seconds
to complete.
• The device is now ready-for-use.
• In order to establish a network communication, connect the USB network adapter having a
1-to-1 connected network cable (included in the delivery) with a free port on your router or
network switch.
If a DHCP server runs in your network, an IP address is now automatically assigned to the
PC. If your Router is already online, an Internet connection should be possible now with the
computer.
Connection and confi guration on a Nintendo Wii
☞
• At fi rst, pull the USB connector from the product holder and connect this to a free USB PORT
on your Wii.
• Now, connect the USB network adapter having a 1-to-1 connected network cable (included in
the delivery) with a free port on your router or network switch.
• Now, switch on your Wii and wait until the system has fi nished loading. Also ensure that your
router is turned on and connected with the Internet.
• Now, jump to the "Wii options" menu and then to "Wii system settings".
On the second page, select the item "Internet".
Now, click on "Connection settings" and select a connection that is not in use yet. You can
recognise this when "not ready" is notifi ed behind the desired connection.
In the next window, click on "LAN connection" and subsequently on "ok" to start the connec-
tion test.
If a DHCP server runs in your network, an IP address is now automatically assigned to your
Wii. The connection test is thus fi nished.
You must fi nally click on "Use this connection", so that data exchange takes place via the
USB network adapter in the future.
☞
Maintenance and Cleaning
The product does not require any maintenance and should never be disassembled for any
reason.
Prior to cleaning, remove the RJ45 cable and pull the product out of the USB port (all network
connections are thus rendered non-operational).
Only use a dry soft cloth for cleaning.
Do not use aggressive cleaning agents as these can cause discolouration.
Do not press too strongly on the surface when cleaning, to prevent scratch marks.
Disposal
Before you connect the USB network adapter to your computer, you must fi rst install
the driver from the enclosed CD. To do this, proceed as follows:
No driver installation is required for operating on your Nintendo Wii.
If no DHCP server is in operation in your network, you must fi rst assign a permanent
IP address to the new connection via the "Change" menu item.
Follow the manual of your Nintendo Wii for this, as well as the remaining confi gura-
tion.
Electrical and electronic products do not belong in household waste!
Dispose of the unserviceable product according to the relevant statutory regulations!
These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1,
D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfi lming,
or the capture in electronic data processing systems require the prior written approval by the editor.
Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in
technology and equipment reserved.
© Copyright 2011 by Conrad Electronic SE.
Werbung
