Bluetooth Operation - Salora SBO680 Bedienungsanleitung

Bluetooth Operation

Bluetooth Operation
Pairing a Bluetooth Device for the First Time
Press the POWER button on the unit or the POWER button on the remote control to
switch on the unit.
Select and press the BT button directly on the remote control or press the
SOURCE button repeatedly to enter Bluetooth mode, indicated by a flashing blue
light.
Using the native controls on your Bluetooth device, selects the "SBO680" in your
Bluetooth settings to pair.
If your device requests a password, enters the default "0000". Refer to the "user
manual" for your specific device for instructions on pairing and connecting Blue-
tooth devices.
When successfully paired and connected, a beep will issue from the unit and the
Pairing Indicator will display a solid blue light. After initial pairing, the unit will
stay paired unless unpaired manually by the user, or until it is erased due to a
reset of the device.
Soundbar has Bluetooth connected to a device, you can press and hold the
MUTE/PAIR button 3 seconds to exit this device in order to pair the device with
another Bluetooth device.
If your device should become unpaired or you find it is unable to connect, repeat
the above steps.
Playing Audio Wirelessly
Follow the instructions for Pairing a Bluetooth Device.
Use the native controls on the connected Bluetooth Device to select a track.
To play, pause or skip the selected track, use the native controls on the connected
Bluetooth Device.
Audio played through the connected Bluetooth device will now be heard through
the speakers.
- 10 -