Declaration Of Conformity - nedis WIFICBO20WT Kurzanleitung

Playing back motion detected videos
Motion detected videos are automatically saved on the microSD card. (If
4
inserted in the camera).
1. Tap Playback to open the stored videos.
2. Select the day of the recording.
3. Zoom and drag the timeline to select the recording.
Settings
Tap the settings key to open the settings screen.
Modify product name
Share products
Product info
Power manage
Basic feature settings
PIR switch
SD card settings
Feedback
Firmware info
Remove product

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product WIFICBO20WT from our
brand Nedis®, produced in China, has been tested according to all relevant CE
standards and regulations and that all tests have been passed successfully. This
includes, but is not limited to the RED 2014/53/EU regulation.
The complete Declaration of Conformity (and the safety datasheet if applicable)
can be found and downloaded via: nedis.com/WIFICBO20WT#support
Change the name of the security camera.
Share access to the product with others.
View information of the product.
View the battery status and set the low
battery signal.
Change the camera settings.
Adjust the sensitivity of the motion
detection.
View the microSD card settings and set
recording settings.
Send product related feedback to Nedis.
View the version of the software.
Remove the product from the Nedis
SmartLife app.
8