heatapp! sense-wire Installationsanleitung Seite 2

EN Installation instruction
Safety instructions
 The device is not suitable for children and
must not be used as a toy.
 Store packaging material safely away from
children or dispose of it.
 Do not dismantle the device; it does not
contain any user-serviceable parts. If defects
occur, please contact your installer.
Description
The heatapp! sense-wire is a wired
temperature sensor for measuring the room
temperature in heatapp! base/T2B . The device
is mounted on the wall and connected to the
heatapp! base/T2B.
Mounting
 Select a suitable mounting location.
 Ensure that no pipes or cables are laid in the
wall beneath the mounting location that could
be damaged by the installation.
 Ensure that the connection to heatapp!
base/T2B can be made at mount location.
 Screw the lower casing in place on the wall in
the desired mounting position through the
fastening holes.
Connect the cable to the terminals on heatapp!
sense wire and terminals E1 and GND of
heatapp! base/T2B
0450000519_1646_12heatapp-sense-wire_EbV_DE_EN
Closing the casing
Place the upper casing on top of the lower casing.
Putting into service
 Choose in the equipment assistant heatapp! base
t2b the energy producer / single room regulation
"off", to activate the entrance E1 heatapp! base
t2b as a room feeler (E1:EF for entrance feeler).
Activate heatapp! sense wire for one of the
available room groups.
Follow the equipment assistant to the equipment
heatapp! base t2b is concluded
Technical data
Mounting
2-wire cable
for example
Ambient temperature
Storage temperature
Dimensions
Colour
Weight
EbV
Elektronikbau und Vertriebs-GmbH
Heisterner Weg 8-12
D-57299 Burbach
www.heatapp.de
info@heatapp.de
The device must be disposed of as electronic waste.
Wall mounted
J-Y(St)Y 1 x 2 x 0.6
2
mm
-10 ... +50 °C
-25 ... +60 °C
79 x 79 x 18 mm
white RAL 9016
ca. 50 g