Problem Solutions - YASIN YD24FDC1 Bedienungsanleitung

Before contacting our service department, please review the following for possible
solutions.
Issue
Monitor LED indicator light is not on
Impossible plug and play
Dark picture
Flickering image or image with ripples
The power indicator light is on (flashing),
but the monitor has no image
Image too red / green / blue
The white does not appear white

Problem solutions

Solution
• Verify the power cord is plugged in.
• Make sure the monitor is turned on
• Check if the plug and play function of
the device is compatible with PC.
• Check if the video card is compatible
with the plug and play function.
• Check whether the signal line 15 pin d
connection is bent
• Adjust the brightness and / or contrast
in the OSD menu
• There may be other electrical devices
or devices with electronic interference
nearby.
• Make sure the PC is turned on.
• Make sure the PC video card is
properly installed. Check if the monitor
signal cable is properly connected to
the PC.
• Check the monitor signal cable plug
and make sure that each pin does not
bend.
• Check the indicator light by pressing
the Caps Lock key on the PC keyboard
and check if the PC is working.
• Check the monitor signal cable and
make sure there is none pin is bent.
• Adjust the colors in the OSD menu
• Set the color temperature
17