Bluetooth Operation - Tivoli Audio THREE BT Schnellstartanleitung

Bluetooth Operation

Prior to pairing, verify your device supports Bluetooth 5.0 and your device is not connected to any
other Bluetooth product. Devices may pair differently. Below is a general guide.
1.
Turn on the Model Three BT to the Auxiliary position. This will power on the
Turn the volume up about ¼ to start. Also turn up the volume on the source device
(the device you are streaming from).
2.
Bluetooth
Turn on the
3.
Select "Tivoli
initiate searching. Some devices may prompt you for a PIN. If so, enter "0000".
Bluetooth
"Tivoli
4.
You will hear a ring tone from the Model Three BT confirming connection and you
can begin playing your music files wirelessly. Adjust the volume level on your device.
You should not have to pair your device again.
need to make multiple attempts at Pairing and/or Connecting to the Model Three BT, but
please give your device adequate time to Pair or Connect before repeating the process.
Reception
The internal FM and AM antennas will provide good reception. For AM, rotate the radio for best
reception. An optional AM wireless antenna may provide improved AM reception.
Buildings made with concrete, steel, or aluminum siding will hinder reception. Household appliances,
electric blankets, computers, CD players, and other electronic devices can also adversely affect
reception or inject noise. If you experience this, move the Model Three BT radio further from the
offending device or plug it into an electrical outlet not shared by another device. Metal surfaces may
also hinder AM reception.
Placement
Place the unit on a flat, stable surface. Placement in a bookcase, cabinet, or close to walls or
corners may inflate the bass.
Cleaning
Never use any harsh cleansers or solvents on your radio. Avoid spray-on waxes. Unplug the Model
Three BT radio prior to cleaning. The face may be cleaned with a slightly damp, soft cloth. Painting
or staining the wood cabinet will void your warranty.
NOTE: Tivoli Audio cabinets use real wood veneers. Since natural wood varies greatly, it
is not possible to achieve an exact wood color/grain match between models. You may also
notice the wood darken over time with exposure to sunlight. Again, this is normal for real
wood.
It is also possible dyed veneers such as blue, red, etc., could fade from exposure to sunlight.
This is not covered under the warranty.
wireless technology on your enabled device.
Bluetooth
(Not Paired)" when it appears on your device's screen to
" will change from "Not Paired" to "Connected".
Depending on your device, you may
Bluetooth.
9 – ENGLISH