Renkforce RF-PPS-300 Bedienungsanleitung Seite 3

Operating instructions
RF-PPS-300
Shredder for Paper (Cross Cut), CDs, DVDs & Credit Cards
Item no. 2252304
Intended use
This product is designed to shred paper, CDs, DVDs and credit cards.
This product is intended for indoor use only. Do not use it outdoors. Contact with moisture (e.g. in a bath-
room) must be avoided under all circumstances.
For safety and approval purposes, do not rebuild and/or modify this product. Using the product for purposes
other than those described above may damage the product. In addition, improper use can cause hazards
such as a short circuit, fire or electric shock. Read the operating instructions carefully and store them in a
safe place. Only make this product available to third parties together with its operating instructions.
This product complies with statutory, national and European regulations. All company and product names
contained herein are trademarks of their respective owners. All rights reserved.
Delivery contents
• Shredder • Collecting container
Up-to-date operating instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the
QR code shown. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in a triangle indicates that there is a risk to your health, e.g.
due to an electric shock.
The symbol with an exclamation mark in a triangle is used to highlight important information in
these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and tips on how to use the product.
This product must only be used in dry, enclosed indoor areas. It must not become damp or
wet, as this may cause a fatal electric shock!
This symbol indicates that this product is built according to protection class II.
This symbol reminds you to read the operating instructions included with the product.
To avoid injury or damage to the product, do not leave the product unattended when children
or pets are in the vicinity.
Do not reach into the input slots.
If you have long hair, ensure that you keep a sufficient distance from the input slots.
Ties, scarves and loose clothing must be kept away from the input slots.
Do not use spray bottles/cans in the immediate vicinity of the product.
Jewellery (such as long necklaces or bracelets) must be kept away from the input slots.
Do not insert paper clips, staples or other metal parts into the input slots.
Separate slot for CDs / DVDs. Never insert CDs or DVDs into the paper input slot. Only insert
one piece at a time.
Avoid touching the feeder with hands, clothing, or hair.
Disconnect the device from the mains outlet if you do not plan to use it for an extended period.
Insert a maximum of 10 sheets DIN A4 (80 g/m
• Operating instructions
) paper into the input slot.
2
Safety information
Read the operating instructions and
safety information carefully. If you do
not follow the safety information and
information on proper handling in
these operating instructions, we will
assume no liability for any resulting
personal injury or damage to prop-
erty. Such cases will invalidate the
warranty/guarantee.
a) General information
• The device is not a toy. Keep it out of the reach of
children and pets.
• Do not leave packaging material lying around
carelessly. It may become a dangerous plaything
for children.
• Protect the product from extreme temperatures,
direct sunlight, strong jolts, high humidity, mois-
ture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical
stress.
• If it is no longer possible to operate the product
safely, stop using it and prevent unauthorised
use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor
ambient conditions or
- has been subjected to any serious transport-
related stress.
• Handle the product carefully. Jolts, impacts or
a fall even from a low height may damage the
product.
• Consult a technician if you are not sure how to
use or connect the product, or if you have con-
cerns about safety.
• Maintenance, modifications and repairs may only
be carried out by a technician or a specialist re-
pair centre.
• If you have questions which remain unanswered
by these operating instructions, contact our tech-
nical support service or other technical personnel.
b) Electrical safety
• The mains socket must be located near to the
device and be easily accessible.
• The product must only be powered by a standard
mains socket connected to the public grid. Before
plugging in the product, check that the voltage in-
dicated on the product corresponds to the voltage
of your electricity supplier.
• Never unplug the mains plug by pulling on the
cable. Always use the grips on the plug.
• Unplug the mains plug from the mains socket
if you do not plan to use the product for an ex-
tended period of time.
Overview
1
1 Input slot for credit cards/CDs/DVDs
2 Ready status LED
3 Overheat warning LED
• For safety reasons, unplug the mains plug from
the mains socket during a thunderstorm.
• Make sure that the mains cable is not squeezed,
bent, damaged by sharp edges or subjected to
mechanical stress. Avoid excessive thermal
stress on the mains cable from extreme heat or
cold. Do not modify the mains cable. Failure to
adhere to these instructions may lead to damage
of the mains cable. A damaged mains cable can
cause a fatal electric shock.
• Do not touch the mains cable if there are any
signs of damage. Power down the respective
mains socket (e.g. via the respective circuit
breaker), and then carefully unplug the mains
plug from the mains socket. Never use the prod-
uct if the mains cable is damaged.
• To prevent risks, damaged mains cables must
be replaced by the manufacturer, an authorized
repair centre or a qualified electrician.
• Never plug in or unplug the mains plug when your
hands are wet.
• Never use the product immediately after it has
been brought from a cold room into a warm one.
This may cause condensation to form, which can
destroy the product. Allow the product to reach
room temperature before use. This may take
several hours.
• Never pour any liquids over electrical devices or
place objects filled with liquid next to the product.
If liquid or an object does get inside the device,
power down the respective socket (e.g. switch off
the circuit breaker), and then remove the mains
plug from the mains socket. Discontinue use and
take the product to a specialist repair centre.
c) Persons and product
• Trained personnel must supervise the use of
electrical appliances in schools, training facilities
and DIY workshops.
• For installations in industrial facilities, follow the
accident prevention regulations for electrical sys-
tems and equipment issued by the government
safety organisation or the corresponding authority
for your country.
• The shredder must always be switched off and
disconnected from the mains before transporting,
moving or cleaning the device and before empty-
ing the collection container.
• Empty the collection container regularly before
it becomes full, otherwise the shredder may be-
come jammed. Unplug the mains plug when you
are not using the collection container.
• The shredder is not suitable for chopping cas-
settes or diskettes.
• The shredder is only intended for private use in
enclosed rooms and is not suitable for commer-
cial purposes.
2 3 4 5
4 On/AUTO, Off, Rev/On CD selector switch
5 Paper input slot