Sophos SG 105 Montageanleitung

Rackmount Kit Mounting Instructions
This Rackmount kit can only be used with SG 105/115 and SG 105w/115w appliances.
Scope of supply
In addition to the rack mounting kit contents, you will need
a long-handed Phillips-head screwdriver.
Step 2:
Install the Power Adapter
Place the adapter on the bracket. Draw attention to the
direction of the power outlet of the adapter. Secure the
position of the adapter with the supplied bevel by using
two round head screws from the scope of supply.
United Kingdom Sales:
Tel: +44 (0)8447 671131
Email: sales@sophos.com
Boston, USA | Oxford, UK © Copyright 2014. Sophos Ltd. All rights reserved.
All trademarks are the property of their respective owners. 9.14.GH.simple
• 2 device holders
(left, right)
• 1 bevel
• 1 adapter bracket
• 6 flat head M3
screws
• 6 round head M3
screws
North American Sales:
Toll Free: 1-866-866-2802
Email: nasales@sophos.com
SG 105/115
Step 1:
Install the Rackmounting Kit Device
Holder to the Chassis
Secure the device holders to the appliance using three
flat head M3 screws from the scope of supply on both
sides.
The device holders must only be fixed to the appliance
by means of the supplied screws. Screws with other
dimensions might damage the appliance!
Step 3:
Mount the Power Adapter to the
Device Holder
Attach the power adapter bracket either to the left or
right side of the rack mounting kit by using four round
head screws from the scope of supply.
Australia & New Zealand Sales
Tel: +61 2 9409 9100
Email: sales@sophos.com.au