Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ATTENTION! Your Back Porch ComposTumbler may be too large to fi t through some doorways
when assembled. You should build it in a space with easy access to the area where it will be used.
STEP 1 – AERATOR PANEL ASSEMBLY
WHAT YOU'LL NEED
Tools:
None
Hardware:
1a - ¼" x 3-1/4" Bolt (6mm x 8.25cm)
1b - Wing Nut
Parts:
Item 4 - (1) Aerator Panel (with large center hole)
Item 6- (1) Aerator Cap
Item 7 - (1) Aerator Base
1.1
Aerator Base
Position the Aerator Base (smooth
side toward the inside of the panel)
on the outside of the hole in the
Aerator Panel.
Go to:
Mantis.com/composterhelp
for a step-by-step instruction
video that will have you
composting in no time!
1.2
Aerator Cap
Position the Aerator Cap on the
inside of the hole, opposite the
Aerator Base.
1.3
1a
6
7
1b
Insert the bolt (1a) through the
Aerator Cap and fasten it to the
Aerator Base with the wing nut (1b).
Note: The wing nut should be fi nger
tight only; over tightening will deform
the Aerator Base.
4
3
Werbung
Inhaltsverzeichnis
