Support - Retro-Bit SEGA SATURN Bedienungsanleitung

SEGA SATURN®
If the LED on the controller is blue, press and hold Start + B until it changes to red. The
•
controller will not function on the console if it is blue.
SWITCH
If the LED on the controller is blue, press and hold Start + B until it changes to red. The
•
controller will not function on the Switch if it is blue.
To set the DPad to Left Analog mode, press and hold Left + Start for 3 seconds
•
To set the DPad to Right Analog mode, press and hold Right + Start for 3 seconds
•
To set the DPad to back to normal, press and hold Up + Start for 3 seconds
•
To flip the face buttons A/B & X/Y, press and hold Down + Start for 3 seconds
•
PC / ANDROID®
• The controller's LED indicates the input mode it is in. To switch between the modes, press
and hold Start + B until it changes color.
»
Red indicates it is in D-Input mode.
»
Blue indicates it is in X-Input mode.
MAC®
If the LED on the controller is blue, press and hold Start + B until it changes to red. The
•
controller will not function on the console if it is blue.
PS3®
If the LED on the controller is blue, press and hold Start + B until it changes to red. The
•
controller will not function on the console if it is blue.

SUPPORT

To stay up to date with the latest news, manuals, and firmware updates, visit
www.retro-bit.com/support.
5