Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating Instructions
Bicycle Phone Mount
Item No. 1923818
Intended Use
The product is a mobile phone holder that clamps
to most standard bicycle handlebars. It has an
adjustable ball joint to optimize viewing angle, and
a spring loaded lock / release mechanism to easily
attach and remove your mobile device.
For safety and approval purposes, you must not
rebuild and/or modify this product. If you use the
product for purposes other than those described
above, the product may be damaged. In addition,
improper use can result in other hazards. Read the
instructions carefully and store them in a safe place.
Make this product available to third parties only
together with its operating instructions.
This product complies with the statutory national and
European requirements. All company names and
product names are trademarks of their respective
owners. All rights reserved.
Delivery Content
•
Phone mount
•
Handle bar mount
•
Hex key
•
Elastic band (spare)
•
Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at www.
conrad.com/downloads or scan the QR code shown.
Follow the instructions on the website.
Explanation of Symbols
The symbol with the exclamation
mark in the triangle is used to indicate
important
information
in
operating instructions. Always read this
information carefully.
The arrow symbol indicates special
information and advice on operation.
Safety Instructions
Read the operating instructions carefully and
especially observe the safety information. If
you do not follow the safety instructions and
information on proper handling in this manual,
we assume no liability for any resulting personal
injury or damage to property. Such cases will
invalidate the warranty/guarantee.
Overview
1
2
3
4
5
7
8
9
a) General Information
•
The device is not a toy. Keep it out of the reach
of children and pets.
•
Do not leave packaging material lying around
carelessly. This may become dangerous playing
material for children.
•
Protect the device from direct sunlight and strong
jolts.
•
Do not place the product under any mechanical
stress.
•
If it is no longer possible to operate the product
safely, take it out of operation and protect it from
any accidental use. Safe operation can no longer
be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor
ambient conditions or
- has been subjected to any serious transport-
related stresses.
•
Please handle the product carefully. Jolts,
impacts or a fall even from a low height can
damage the product.
•
Consult an expert when in doubt about the
operation, safety or connection of the appliance.
•
Maintenance, modifications and repairs must
only be completed by a technician or an
authorised repair centre.
•
If you have questions which remain unanswered
by these operating instructions, contact our
technical support service or other technical
personnel.
b) Stand
•
Looking at your mobile device while riding your
bicycle can be dangerous.
these
•
To help deter theft, remove the clamp from the
handlebar mount when leaving your bicycle
unattended.
•
The clamp may not sufficiently secure your
phone under jarring vibrations such as those
caused by riding a mountain bike over rugged
terrain. Always use the included elastic band as
fail safe.
c) Mobile Phone
•
Prolonged exposure to heat / UV from the sun
may permanently damage your phone or cause
it to malfunction.
1 Clamp-mount connection
2 Ball joint
3 Elastic band
10
4 Clamp screws
5 Bottom bracket release
6 Elastic band hook
11
7 Side bracket
8 Side bracket open
9 Bottom bracket
12
10 Padded surface
11 Side bracket close
12 Ball joint lock screw
13
13 Rubber strip
14
14 Clamp
Operation
a) Clamp Assembly
An extra elastic band has been included as a spare, keep it in a safe location.
b) Mobile Phone Holder
c) Mounting to Handlebar
6
Care and Cleaning
•
Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as they can
cause damage to the housing and malfunctioning.
•
Clean the product with a dry, fibre-free cloth.
Disposal
At the end of its service life, dispose of the product in accordance with applicable regulatory
guidelines. You thus fulfill your statutory obligations and contribute to the protection of the
environment.
Technical Data
Phone clamp ......................................... Width: 60 - 95 mm
Clamp opening ..................................... ø15 - 30 mm (fits standard handlebars)
Material ................................................. ABS with stainless steel screws
Dimensions (L x W x H) ........................ 130 x 103 x 127 mm
Weight .................................................. 140 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represents the technical status at the time of printing.
Copyright 2019 by Conrad Electronic SE.
Height: 100 - 120 mm
*1923818_v1_0519_02_dh_m_en(2)
Werbung
