Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SCHARTEC
a trademark of bau-shop-24 GmbH
Fritz-Müller-Strasse 119
73730 Esslingen
Germany
WEEE Reg. Nr.: DE90317979
BattG Reg. Nr.: 21008776
•
Keep remotes out of reach of children.
•
Remote controls may only be operated by persons who are familiar with the system and have been instructed
in their function.
•
Use the remote control only when you are in sight of the door / gate.
•
Coding in remote controls must always be carried out within the vicinity of the door operator. Use only original
parts.
•
Protect remotes from rain, snow, sunlight or dust, otherwise the function of the transmitter may be impaired
•
To replace the battery, unscrew the screws on the back of the remote.
The original remote and the YET026 must have the same frequency (433.92 MHz); Rolling-Code frequencies
•
are not supported; not compatible with DIP switches.
Programming
Step 1:
1. Press button A and button B at the same time and keep them pressed until the LED has flashed 3 times quickly.
2. Continue to hold down button A and press button B three times in quick succession.
3. Now the LED flashes permanently. Hold this state for about 3 seconds, then release both buttons.
4. The code is cleared when the LED stops illuminating permanently when a key is pressed. (should the LED light
up and remain lit, then it did not work. Please repeat before you start with step 2!)
WARNING!
This step also serves as a factory reset and deletes all stored codes !!!
Step 2:
1. Take your original remote control into your left hand and the YET026 in your right hand.
2. Hold both remotes either back to back, head to head, or side by side (try multiple variations if necessary).
3. Now press the button on your original remote that you would like to transmit and the button on the YET026 that
you would like to inherit the transmitted code. Hold both buttons until the LED lights continuously.
IMPORTANT!
remote lights 2 times fast -> then 3 times slow -> then continuously!
Schartec hereby declares that the remote control YET026 complies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is
As a dealer for the distribution of electronic, battery-operated devices, we are obliged by law to inform our customers about the following:
Electrical and electronic devices, as well as batteries, must not be disposed of as household or residual waste, but must be delivered in the
Schartec Remote Control YET026
Frequency: 433.92 MHz
dBm: 11
Channels: 4
Battery: 12V/27A
Working temperature: -20°C to +60°C
Article number: ST301007
Model number: YET026
All channels will have to be re-taught !!!
Programming Video
Please visit www.schartec.de/en
Simplified EU Declaration of Conformity (CE)
available at the following Internet address: www.schartec.de/en
Information about battery regulation
appropriate acceptance and collection points will.
The complete version of the battery law can be found here:
http://www.gesetze-im-internet.de/bundesrecht/battg/gesamt.pdf
Werbung
