Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Introduction
Dear customer,
With the CSE100 you have acquired a LED (24 V DC) that is also integrated in the CSE55. The device consists
of 6 separate LEDs which emit a light when an electrical power of 24 V DC is applied. If one LED is broken,
the other five LEDs will continue to emit visual evacuation signals.
Warning
Only use the correct power voltage, exceeding these limits could cause fire or other failures.
Avoid explosions: do not use the LED around gasoline, thinner or other combustibles.
Use fixing materials that are appropriate for the ceiling's or wall's structure and composition. Failure in
doing so may cause the LED to fall down.
Tighten each nut and bolt securely. Prevent accidents: ensure that the used bracket has no loose elements
after installation.
Avoid mounting the LED in locations exposed to constant vibrations. The LED can be damaged by
excessive vibration, potentially causing the LED to fall down.
Caution
Avoid electric shocks: switch off the power when connecting the LED.
Avoid installing the LED in locations exposed to solvents, acids, smoke and heaters, as excessive
exposure to these factors could result in LED failure, fire or electric shock.
Do not stand or sit on it, nor hang down from the LED as this may cause it to fall down or drop.
2
Werbung
