Herunterladen Diese Seite drucken

Lindy 70480 Benutzerhandbuch Seite 3

3/5 port toslink (optical) digital audio splitter

Werbung

User Manual
Introduction
Thank you for purchasing the 3/5 Port TosLink (Optical) Digital Audio Splitter This product has been
designed to provide trouble free, reliable operation. It benefits from both a LINDY 2-year warranty and free
lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future
reference.
This range of TosLink (Optical) digital audio splitters allows the connection of either 3 or 5 digital optical
output devices such as speakers, amplifiers or soundbars to a single digital audio source device.
Package Contents
3/5 Port TosLink (Optical) Digital Audio Splitter
USB Type A to Mini-B cable, 0.76m (2.49ft)
Lindy Manual
Features
Distributes a single digital audio signal to up to 3 output devices.
Supports 2-channel LPCM, DTS & Dolby Digital audio.
Transmits digital optical audio signals up to 40m (131.23ft) using high quality optical audio cables.
Specification
Audio interface: TosLink (Optical)
Supported audio formats: LPCM2.0, DTS, Dolby Digital
Supported audio sampling frequency: Up to 96kHz
Maximum cable lengths: Input: 5m (16.4ft) Output: 40m (131.23ft)
Storage temperature: -10°C - 80°C (14°F - 176°F)
Operating temperature: 0°C - 40°C (32°F - 104°F)
Humidity: 5-90% RH (non-condensing)
Connections:
Input: 1 x TosLink (Optical) Female
Output: 3/5 x TosLink (Optical) Female
Power: Mini-USB (Female)
Housing material: Plastic
Colour: Black
Installation
For installation, please follow the steps below:
Connect a TosLink (Optical) audio cable from a source device to the input port on the 3/5 Port
TosLink (Optical) Digital Audio Splitter.
Depending on the desired number of outputs, connect an optical audio cable from the output
ports on the splitter to the optical input port on the audio output devices.
Connect the included USB Type A to Mini-B cable to the devices' Mini-USB port and a powered,
USB 2.0 (or higher) port or a USB charger.
Power on the audio source and output devices.
Installation is now complete.
English

Werbung

loading

Diese Anleitung auch für:

70481