How To Use - Konami PC Engine CORE Grafx Mini Anleitung

How to use

Connect the cable
①
Connect the Gamepad to
Gamepad port.
The Multitap is only compatable with the controller that comes with
PC Engine mini/TurboGrafx-16 mini/Core Grafx mini or Turbo Controller
for PC Engine mini/TurboGrafx-16 mini/Core Grafx mini from HORI (HTG-003).
If you wish to use more than three controllers, you must use Multitap for
PC Engine mini/TurboGrafx-16 mini/Core Grafx mini from HORI (HTG-004).
③
Connect USB cable to AC Adapter
Port and AC Adapter (sold separately)
Power On
Turn the power on, and choose the game
to play from the menu.
Please turn the power off and remove
both AC Adapter (sold separately) and
USB Cable when you are finished playing.
Make sure that both shut down screen
and power is OFF before you remove the
AC Adapter and/or Micro USB cable.
* Cannot use the original PC Engine Core Grafx
Gamepad, HuCARD.
④
Connect the AC Adapter
(sold separately) to an
electrical outlet.
②
Connect the HDMI Cable to
PC Engine Core Grafx mini and TV monitor.
Top: Player 1 port
Bottom: Player 2 port
To TV monitor HDMI Port
Regarding AC Adapter
Please use an AC Adaptor that supports 5V / 2.0A USB
(Type A) output (sold separately)
*Not all AC adapters are guaranteed to function.
How to open the system menu
Press Run Button and Select Button
together to open the system menu.
In the system menu, you can save,
load, and reset the game.
Press together