numskull VR Bedienungsanleitung

VR HEADSET STAND
Contents:
1 x VR Headset Stand for use with PlayStation
1 x Velcro Cable Tie
Setup:
1. Place your VR Headset Stand on a stable platform*.
2. Place your VR Headset on the stand ensuring that the front of the headset is aligned
with the front of the stand - the front is marked by the engraved PlayStation
on the base of the stand**.
3. Secure your VR Headset in place by tightening the straps.
4. Once your VR Headset is secured you can adjust the height of your VR Headset
Stand by releasing the clasp on the adjustable height mechanism.
5. Once your VR Headset is at a satisfactory height and is secured any cables can be
fastened using the Velcro Cable Tie provided.
* Ensure that your VR Headset is turned off before placing it on to the stand.
** Take care to position the VR Headset correctly on the stand to avoid the internal
lenses touching the stand.
TECHNICAL SUPPORT
If you encounter a problem with your product, please go to: http://www.numskull.co.uk and click Technical Support.
From there you will be able to access the 'Frequently Asked Questions' section, and our contact details.
Alternatively you can contact us at:
Email: hello@rubberroad.co.uk
International Telephone: +441707 800881
VR
®
VR detailing
®
" " and "PlayStation" are registered trademarks of Sony Interactive Entertainment Inc. All rights reserved.
Licensed for sale in Europe, Africa, Middle East, Russia, India and Oceania and for use exclusively with
PlayStation VR. Manufactured by Rubber Road Ltd, United Kingdom, AL7 1HH (Rubberroad.co.uk).
®
Made in China