Technical Data - EINHELL ERGO TOOLS E-AS 18-2/1H Bedienungsanleitung

Anleitung E-AS 18-2-1H SPK 7
GB
On/Off switch (4)
Infinitely variable speed control is possible with the
On/Off switch. The further you press the switch, the
higher the speed of the battery-powered
drill/screwdriver.
Screwdriving
We recommend using self-centering screws (e.g.
Torx screws, recessed head screws) designed for
reliable working. Be sure to use a bit that matches
the screw in shape and size. Set the torque, as
described elsewhere in these operating instructions,
to suit the size of screw.
Special additional functions (Fig. 4):
The cordless screwdriver comes with two additional
functions for difficult to access positions.
Battery rotator
The battery can be rotated through 180° in an
anti-clockwise direction.
Articulated joint
By pressing the two locking buttons (7) at the side
you can tilt the cordless screwdriver upwards. To
tilt it back down again you also have to press the
two locking buttons. In each case the cordless
screwdriver will lock into its final position.

Technical data

Voltage supply
Speed 0-550 rpm
Torque
Forward and reverse rotation
Chuck clamping width 0,8 - 10 mm
Battery charging voltage
Battery charging current
Mains voltage for charger 230 V ~ 50 Hz
Sound pressure level LPA:
Sound power level LWA:
–
Vibration
a
w
8
04.08.2004 9:30 Uhr
!
Rechargeable batteries and cordless electric
machines and tools contain materials that are potentially
harmful to the environment. Never place any cordless
electric machines or tools in your household refuse.
When cordless electric machines or tools become
defective or worn, remove the rechargeable batteries and
return them to iSC GmbH Eschenstrasse 6, D-94405
Landau, Germany. If the rechargeable batteries cannot
be removed, return the complete cordless machine or
tool. You can then be sure that the equipment will be
correctly
18 V =
16 levels
yes
18 V =
1200 mA
70 dB(A)
80 dB(A)
< 2,5 m/s 2
Seite 8
iNTERNATiONALES SERViCE CENTER GmbH