Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

CHANNEL key, a small number at the top right corner of
the LCD indicates the actual channel 1 or 2.

CHARGER SETUP

Before charging your battery, you must setup the charger
according to the battery manufacturer's recommendation;
make sure that you properly identify the battery type and
specifications. The charger has two independent charger
channels meaning that the charger can charge two different
batteries simultaneously, this also means that you must
adjust each charge channel separately. When entering the
settings, make sure you are adjusting the proper channel
(1 or 2).
 Modifying the settings
To modify the settings, press the ENTER key to enter the
setup mode and select the different parameters and then
use the + and – key to change the value of the parameter.
You can exit the setup mode by pressing the SET/MODE
key.
 Settings memory
The charger has 10 memory slots where your charge
settings are automatically saved.
 Battery type
The charger can charge NiMH/NiCd/LiPo/LiFe batteries.
www.teamorion.com
It is very important to select the correct battery type to
avoid accidents!
 Number of cells
The charger can charge up to 8 NiMH/NiCd and up to
4 LiPo/LiFe cells. It is very important to set the correct
number of cells to avoid accidents!
 Battery capacity
By adjusting the battery capacity, the charger automatically
adjusts the charge current to 1C (one time the battery ca-
pacity). Please make sure that you set the correct capacity
in mAh as indicated on the battery you with to charge.
Note: as an extra safety measure, when charging NiMH/
NiCd batteries, the charge will stop when the charged mAh
counter reaches the preset value.
 Charge current
Charge current can be adjusted in 0.1A steps up to 6A. The
standard charge current is 1C, which means one time the
battery capacity (4000mAh = 4A). The charge current is
auto adjusted when you adjust the battery capacity, if you
are not familiar with charging batteries; we recommend
that you do not alter this setting (as long as you have set
the correct battery capacity). It is very important to set the
proper charge current to avoid accidents!
English - 5

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis