Konig Electronic SEC-IPCAM100B Anleitung Seite 8

Searching Wi-Fi Router
The status LED will flash green until the Wi-Fi router is found (up to 5 minutes).
3
Once the router is found, the status LED will become orange.
If the IP camera cannot connect to the Wi-Fi router, please check the Wi-Fi router status or
re-install.
In the app, select the camera name that is shown in the Camera List, and the viewing
window will open(see Figure 15).
Add already installed IP camera to the app
ANDROID (for Apple go to: Step 5)
1
Open the "uCare Cam" app and select:
In the Camera List Window screen (see figure 16) for adding an IP camera.
2
Select the tab:
Your device will now enter the QR code mode.
Note: you need to have a QR code scanner installed on your device.
Locate the QR code on the backside of the IP camera and scan the QR code.
3
After scanning the QR code, the UID (Unique ID code) appears in the screen of your
device (see Figure 17).
Click here to import installed Wi-Fi Camera
8