Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
First use
CAUTION Rotating parts can cause injury!
•
Never put your hand into the appliance/blade when the
motor is running.
•
Unplug the appliance from the mains before assem-
bling, disassembling or cleaning it.
•
Clean the appliance thoroughly using a damp cloth be-
fore using it for the first time.
•
Only operate the appliance on a non-slip, even and
clean surface.
Using the stainless steel blender foot and the whisk
(taking the example of the stainless steel blender foot
here)
CAUTION Sharp parts can cause injury!
•
The cutting surfaces of the stainless steel blades are very
sharp! Handle the stainless steel blades with care.
•
When not using the stainless steel blender foot and
when assembling and disassembling it, always make
sure that the protective cover supplied is placed over
the blade.
Connect the attachment
1
such that the marking
with the
red line
of the JUPITER logo.
Turn the attachment counter-clockwise until both mark-
2
ings
align and the attachment engages audibly.
1
•
It can be disassembled using the same steps in reverse
order.
3
Place the blending jug
I
4
Place the ingredients to be processed in the blending
jug.
Comply with the maximum fill quantity for
Important:
blending marked on the container (
).
CAPACITY
Remove the protective cover from the blade.
5
6
Immerse the attachment into the ingredients to be pro-
cessed.
Plug in the mains plug.
7
Subject to technical changes without notice; no responsibility is accepted for the accuracy of this information.
to the motor housing
E/F
on the attachment lines up
2
clic
on the non-slip pad
H
.
MAX BLENDING
Using the chopper
CAUTION Sharp parts can cause injury!
The cutting surfaces of the stainless steel blades are very
sharp! Handle the stainless steel blades with care.
Press the chopper
1
Insert the chopping blade into the container (blade
2
downwards, see illustration).
3
Place the ingredients to be processed into the container.
Important:
Comply with the maximum fill quantities for
dry (
) and liquid (
MAX DRY
marked on the container.
Place the lid on the container.
4
Bayonet fitting
Lock the bayonet fitting by turning the lid clockwise.
5
Place the motor housing on the chopper.
6
Info:
The motor housing is placed and locked on the
chopper in a manner similar to that described under
ing the stainless steel blender foot and the whisk.
7
Turn the motor housing clockwise until both mark-
ings
line up and the motor housing engages audibly
(detail
X
).
,
D
clic
6
H
Plug in the mains plug.
8
Switching on and regulating the speed.
CAUTION Rotating parts can cause injury!
Never put your hand into the appliance/blade when the
motor is running.
•
Press and hold the ON button
StickMaster.
Info:
In order to avoid ingredients splashing out on
start-up, the StickMaster has a
which allows the appliance to ramp up slowly to the
set speed.
firmly onto the non-slip pad
G
) ingredients
MAX LIQUID
7
X
1
to switch on the
B
SOFTSTART
.
H
Us-
function
7
Werbung
Inhaltsverzeichnis
