How To Operate - WOXTER UPS Serie Kurzanleitung

EN

HOW TO OPERATE:

First time using the UPS, connect the UPS with mains
without computer; push the power switch on to start up
the unit and charge the battery 8 hours. Connect the
computer with UPS, and then switch on the computer. If
the UPS with battery will supply the power, please save
the file running in the computer and switch off the
computer as soon as possible to longer battery life.
NOTICE
- Please do not overload the UPS.
-Charge the battery every 3months regularly.
- When long time not use the UPS, switch off the UPS
before leave.
INTRODUCTION:
The UPS is a new equipment of power supply which is a
square wave and wisdom uninterruptible power supply.
It adopts advanced microcomputer control and LED
display meter. It will be warning when the voltage lower
and it can be running in time, so that it can avoid losing
data from the computer. The UPS series have some
advantages as following: High precision control stabilizer
voltage high reliable and refined surface. It is the best
friend for your computer.
3