Troubleshooting; Technical Data - NORSE SK135 Bedienungsanleitung

SK135

Troubleshooting

Symptom
No detergent
1. Detergent tank is clogged
suction
1. Unit is pressurised
Pressure washer
2. Plug is not connected correctly or
does not start up
3. Thermal safety switch has tripped
1. Water inlet is clogged
2. Pump sucking air from hose
Pump does not
reach necessary
3. Variable spray nozzle is worn or not
pressure
4. Unloader / valves are clogged/ worn
1. Pump is sucking air
2. Clogged nozzle
Fluctuating
pressure
3. Valves dirty, worn or clogged
4. Water seals worn
Motor stops
1. Thermal safety switch has tripped due
suddenly

Technical Data

Item
Working pressure
Allowable pressure
Maximum flow rate
Motor capacity
Power supply voltage
Intake water pressure
Max input temperature
Dimensions
Weight
Possible Cause(s)
electrical supply is damaged / faulty
connections
correct size
to overheating
English
1. Clean detergent tank with warm water
1. Clean water inlet
2. Check that connections are properly
tightened
3. Switch off unit and allow to cool down
1. Clean quick connector filter
2. Check that connections are properly
tightened
3. Call the dealer
4. Call the dealer
1. Check that hoses and connections are tight
2. Clean with tip cleaner
3. Call the dealer
4. Call the dealer
1. Check mains supply voltage corresponds to
specifications
SK135
13.5 MPa / 135 BAR / 2000 PSI
20.5 MPa / 205 BAR / 3000 PSI
500 Litres / hour
2400 Watt
240V ~ 50HZ
Min 0.1MPa / Max 1MPa
50 °
380 x 355 x 735mm
16.7 Kg
© NØRSE
Corrective Actions
15