Inhaltsverzeichnis
Werbung
Diagnostic and malfunction indicator. Select to view detailed
information about diagnostic or malfunction alerts
Diagnostics and Malfunctions, page
Driver name and duty status. Select to change the driver's duty
status
(Changing Duty Status, page
NOTE: You cannot change your duty status while driving.
Current remaining drive hours. Select to view detailed drive hours
information in the Garmin eLog app.
Driving in a Team
If you are driving in a team, you can switch between active
drivers at any time. Each driver must log in to the Garmin eLog
app before they can be set as the active driver.
From the Garmin eLog app, select the icon
user who should be listed as the active driver.
Changing Duty Status
For the most accurate records, you must change your duty
status in the Garmin eLog app every time you change your
driving status, such as when you start driving, take a break,
switch drivers, or change the type of driving you are doing. The
Garmin eLog adapter automatically switches to driving status
when the vehicle's diagnostic port reports a speed greater than
or equal to five miles per hour. The vehicle is stopped when the
diagnostic port reports a speed of zero miles per hour.
NOTE: The vehicle must be stopped to change duty status. You
cannot manually change duty status while you are driving.
1
Select an option:
• From the Garmin eLog app, select
• From the Garmin eLog map tool, select the driver name.
2
Select an option:
NOTE: The Personal Conveyance and Yard Moves options
are available only if the administrator has enabled them for
your driver profile
(Editing a Driver Profile, page
• If you are on duty, select On Duty.
• If you are off duty, select Off Duty.
• If you are on duty and driving, select Driving.
20
(Viewing
21).
20).
next to the
.
23).
• If you are moving to the sleeper berth, select Sleeper
Berth.
• If you are using the vehicle for personal conveyance,
select Personal Conveyance.
• If you are moving the vehicle within the yard, select Yard
Moves.
Editing a Duty Status Record
You can update individual duty status entries to make
corrections or updates to your duty status history as allowed by
FMCSA regulations. This can be useful if you forget to change
your duty status.
1
From the Garmin eLog app, select the duty status record for
the affected time period.
2
Select Duty Status.
3
Select the correct duty status for the time period.
4
If necessary, update the start and end times for the duty
status entry.
5
If necessary, enter the location where this duty status was
active.
6
Enter an annotation describing the reason for the change.
7
Select Save.
Viewing Hours of Service
1
From the Garmin eLog app, select HOS.
2
Select an option:
• To view a chart of your hours of service information, select
.
TIP: You can select the chart to view a larger image of
your information.
• To view a list of remaining drive hours, select .
Recording Adverse Conditions
If you require a time extension because of adverse conditions,
you can add a two-hour extension to your hours for the day.
From the Garmin eLog app, select
Conditions > Ja.
Reviewing Logs
The Garmin eLog app keeps track of logs that may require
review, including logs that have been edited or logs that exist for
an unidentified driver. When a driver logs in, the app prompts
them to review logs that contain an unidentified driver, if any are
available. Drivers are responsible for reviewing and claiming
logs, if applicable.
1
Select HOS >
.
2
Select a log.
3
Select an option:
• If the log applies to you and your hours of service, select
Accept.
• If the log does not apply to you, select Decline.
Certifying Daily Logs
After you are finished driving for the day, you should certify your
daily log. If you update your duty status after certifying it, you
must certify it again.
From the Garmin eLog app, select
Submitting a Daily Log
You can submit a daily log to your motor carrier.
1
From the Garmin eLog app, select
2
Select an option to share your exported log.
> Record Adverse
> Agree.
.
Garmin eLog
Werbung
Inhaltsverzeichnis
