Product Description; Specifications - Stroxx 50W SMD Montageanleitung

Corded Flood Light

Product Description:

x 50W corded flood light with LED SMD technology and optical lens
x
x IP54 – Resistant to water and dust infiltration
x
x IK08 for strong impact resistance
x
x 2 power outlets on back of light
x
x Powerful and uniform bright illumination
x
x With the flexible stand it is possible to place the lamp in the desired angle or use it as a hanger
x
x M8 hole on stand for fixed on tripod or other location
x
x Foam housing with integrated handle for better feeling on hand and protection on housing
x
x 5V 2A USB output compatible optional smart control accessories
x
x 5 brightness indicators provide straight and real-time state information
x
x Equipped with resettable overload protector. This protector will cut the power when total
x
current on two sockets is over 15A. Lamp would be turned off at the same time and it will be
reset when the overload equipment is removed.

Specifications

Power Requirement:
Cable:
Brightness:
Warning:
x Wear safety goggles (User and bystander)
x
x Avoid looking directly into the beam
x
x Do not use the lamp near open flames
x
x Do not cover the lens during the operating to prevent against overheating
x
x Do not contaminate the lens with organic solvents
x
x Take care to position the light and stand in a careful manner, to ensure the light is properly
x
supported by the stand
x After adjustment of light bracket angle, be sure to tighten the adjustment screw
x
x When using this light at a height of 3m or greater, take extra precautions to ensure safe use.
x
Take additional precautions to prevent falling objects from causing harm to bystanders and
nearby equipment.
100 - 240Vac 50 / 60Hz
H07RN 3x1.5SQ.MM
± 5,000 lumen @100%
± 500 lumen @10%
en