Konformitätserklärung; Hardware Monitor; Zusätzliche Informationen - Allnet X3Pro Anleitung

Daydream
Daydream hilft bei der Auswahl der Aktion für das Standby-Gerät.
Einstellungen -> Gerät -> Anzeige -> Daydream; Aktion wählen
Hardware-Monitor
Zeigt Informationen über den Zustand der TV-Box an.
Einstellungen -> Geräteeinstellungen -> HW-Monitor; wählen Sie, welche Werte in der oberen
Leiste angezeigt werden sollen.
Zusätzliche Informationen
Aufgrund unterschiedlicher SoC in einigen Geräten und häufigen Aktualisierungen können sich einige Informationen
über Einstellungen im Laufe der Zeit ändern.
10
Konformitätserklärung
Hiermit erklärt ALLNET GmbH Computersysteme, dass sich die ALLNET PoE Displays in Übereinstimmung mit den
grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EC oder
2014/53/EU befindet.
Die Konformitätserklärung kann unter folgender Adresse gefunden werden: www.allnet.de/downloads.html
ALLNET GmbH Computersysteme declares that the devices ALLNET PoE Displays is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC or 2014/53/EU.
The Declaration of conformity can be found under this link: www.allnet.de/downloads.html
EU contact
ALLNET GmbH Computersysteme Tel. +49 (0)89 894 222 - 22
Maistrasse 2 Fax +49 (0)89 894 222 - 33
82110 Germering Email: info@allnet.de
The RoHS directive aims to restrict certain dangerous substances commonly used in electronic and electronic equipment. This RoHS
compliant symbol indicate the component is tested for the presence of Lead (Pb), Cadmium (Cd), Mercury (Hg), Hexavalent chromi-
um (Hex-Cr), Polybrominated biphenyls (PBB), and Polybrominated diphenyl ethers (PBDE). For Cadmium and Hexavalent chro-
mium, there must be less than 0.01% of the substance by weight at raw homogeneous materials level. For Lead, PBB, and PBDE,
there must be no more than 0.1% of the material, when calculated by weight at raw homogeneous materials. Any RoHS compliant
component must have 100 ppm or less of mercury and the mercury must not have been intentionally added to the component.
CE Marking is the symbol as shown on the left. The letters „CE" are the abbreviation of French phrase „Conformity European" which
literally means „European Conformity". The term initially used was „EC Mark" and it was officially replaced by „CE Marking" in the
Directive 93/68/EEC in 1993. „CE Marking" is now used in all EU official documents.
This symbol is new RED aligns the previous directive with the New Legislative Framework for the marketing of products. The revision
takes account of the need for improved market surveillance, in particular for the traceability obligations of manufacturers, importers
and distributors. It provides improved instruments for market surveillance, such as the possibility to require prior registration of radio
equipment, within those categories affected by low levels of compliance.
The Directive requires equipment to be constructed for efficient use of the radio spectrum, as well as electromagnetic compatibility, to
avoid interference with terrestrial and orbital communications.
This recycle logo indicates that this product is capable of being recycled, not that the product has been recycled or will be accepted in
all recycling collection systems.
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste.
Instead, it is your responsibility to dispose of your waste equipment by handing it over at a designated collection point for the recyc-
ling of waste electical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal
will help to conserve natural resources and ensure that its recycled in a manner that protects human health and the environment. For
more information about where you can drop off your waste equipment for recycling, please contact your local city office, your house-
hold waste disposal service or the shop where you purchased the product.
www.allnet.de
11