USRobotics 56K USB Modem Installationsanleitung Seite 11

Windows XP
A. Click Windows Start > Control Panel.
B. Click Phone and Modem Options and then click the Modems tab.
C. Highlight the description of your new modem, and click Properties.
D. Click the Diagnostics tab and then click the Query Modem button.
Windows 2000
A. Click Windows Start > Settings > Control Panel.
B. Double-click the Phone and Modem Options icon.
C. Click the Modems tab.
D. Click the Properties button.
E. Click the Diagnostics tab.
F. Click the Query Modem button.
Linux 2.4.20 or higher
A. Verify you have a USB modem driver (CDC ACM) compiled into a Linux
B. Verify the PWR LED on the modem is lit.
C. Unplug the USB modem from your computer, then plug the modem back
D. For advanced troubleshooting information, see the Linux folder on the
Downloaded from www.Manualslib.com
If you see a series of commands and responses from the modem, the
installation was successful.
If you do not see a description of your modem, the installation was not
successful; repeat the installation procedure.
You should see U. S. Robotics V.92 USB Modem and a COM port set-
ting. If you do not see a description of your modem, repeat the installa-
tion procedure.
If you see a series of commands and responses from the modem, the
installation was successful.
If you do not see a description of your modem, the installation was not
successful; repeat the installation procedure.
Make sure that U. S. Robotics V.92 USB Modem is selected. If you do
not see a description of your modem, repeat the installation procedure.
If you see a series of commands and responses from the modem, the
installation was successful.
If you do not see a series of commands and responses, the installation
was not successful; repeat the installation procedure.
kernel 2.4.20 or higher or as a loadable module for your kernel.
in. If the PWR LED does not light, try another USB port on your com-
puter.
USRobotics Installation CD-ROM
manuals search engine
English
7