Inhaltszusammenfassung für Maker Factory M5Stack Plus
Seite 1
BN 2108264 M5Stack Plus Module Quick Instructions Version: 1 Delivery Content Module Development Resources Development resources and additional product information are avail- able from: https://www.conrad.de/ https://docs.makerfactory.io/ Description The module comes with the following built-in components: LiPo battery (500 mAh) Programmable Gear Potentiometer...
Seite 2
Battery LiPo 500 mAh Protocol I2C (Address: 0x62) Dimensions (approx.) 54 x 54 x 13 mm (W x D x H ) Weight (approx.) 20 g Disposal Electronic devices are recyclable waste and must not be dis- posed of in the household waste. At the end of its service life, dispose of the product in accordance with applicable regulatory guidelines.
Seite 3
BN 2108264 M5Stack Plus-Modul Kurzanleitung Version: 1 Lieferumfang Modul Ressourcen für Entwickler Ressourcen für Entwickler und zusätzliche Informationen zum Pro- dukt sind verfügbar über: https://www.conrad.de/ https://docs.makerfactory.io/ Beschreibung Das Modul besteht aus den folgenden Komponenten: LiPo-Akku (500 mAh) Programmierbares Potentiometer IR-Sender Erweitert Port B (GPIO) und Port C (UART) des M5 Core.
Seite 4
Akku/Batterie LiPo 500 mAh Protokoll I2C (Adresse: 0x62) Abmessungen (ca.) 54 x 54 x 13 mm (B x T x H) Gewicht (ca.) 20 g Entsorgung Elektronische Geräte sind Wertstoffe und gehören nicht in den Hausmüll. Entsorgen Sie das Produkt am Ende seiner Lebensdauer gemäß...