Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Field of application:
The devices are suited only for distributing radio and television signals in the
house! If the device is used for other purposes, no warranty is given!
The illustrations show application examples of the amplification of SAT signals
(1) respc. the amplification of combined signals of a terrestrial and a Satellite
antenna (2).
4
5
Output
Equipotential bonding and Mounting:
To avoid dangerous overvoltages (attention: risk of fire/death), the devices
must be connected to the equipotential bonding according to EN 60728-11.
Use the equipotential bonding connection attached to the device (3).
To connect the outer conductor of the coaxial cable to the equipotential
bonding, use e.g. earth connection blocks CFA 7-01 at the input and output
of the amplifier.
Mount the device on a flat surface.
Use the mounting screws included in the delivery and the mounting holes
of the devices (4).
RF Installation:
Connect your LNB either directly to the amplifier input (1) or via a
combiner (2).
Connect the output of the amplifier to the antenna sockets or the taps
used.
Use a highly shielded coaxial cable with an F connector. Suited cables and
plugs can be found in the current AXING catalogue or at www.axing.com.
Level Adjustment:
The input level may be adjusted with the attenuator (5).
3
4
Input
1
2
Werbung
