Team MS 8300 Handbuch Seite 6

Fax +32 2 359 95 50

IMPORTANT INFORMATION
This appliance is not for professional use. You should follow the requested breaks. Failure to
follow this instruction carefully may result in damage to the motor. Please refer to the rating
label for the maximum continuous usage time (KB xx min where xx is the maximum usage time).
The breaks should last at least 10 minutes.
USE OF THE STICK MIXER ATTACHMENT
With this accessory you can mix food as for example vegetables to prepare soups but also to
mix liquids. It only has to be used in a vertical position with blades facing downwards.
 Make sure the switch is in "0" position.
 Mount the stick onto the base and turn it 90° clockwise in order to lock it. To detach the
stick, proceed the other way around and close the protection valve.
 Caution, the blade is extremely sharp, handle them with great care when cleaning it.
USE OF THE WHISK ATTACHMENT
 Make sure the switch is in "0" position and that the appliance is switched off.
 Put the whisk attachment on the stick. Make sure that the blade fits correctly in the recess
and that the pins are fitted correctly.
 Check if it is assembled correctly by pulling gently at the attachment.
 To mix, use the measuring cup supplied.
 To remove the attachment, proceed the other way around.
USE OF THE CHOPPING ATTACHMENT
 Put the chopping blade on the shaft of the chopping bowl. Caution, the blade is very
sharp, handle it with care to avoid injuries. Put the ingredients in the bowl.
 Mount the lid on the bowl and put the base on the lid. Turn the base 90° clockwise until all
parts are well fitted to each other.
 Use the pulse switch to chop the ingredients.
 To remove the attachment, proceed the other way around.
WALL MOUNTING BRACKET
Some models come with a wall-mounting bracket. Mount this bracket with the screws and
plugs provided where you desire. You can use this bracket to store your appliance and its
attachments.
CLEANING
 Always unplug the appliance from the power supply before cleaning it.
 Remove the accessories before washing them in soap water. Do not use scouring pads for
the plastic materials. Rinse with clear water and let dry before each new use. Do not
place them in the dishwasher.
 Wipe the base with only a slightly moistened cloth, ensuring that no moisture enters
the cooling slots.
 Do not clean with any abrasive scouring pad or steel wool, as this will damage the finish.
 Do not immerse the motor bloc in water or any other liquid.
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don't change the page numbering. Keep the
language integrity.
6
Assembly page 6/12